Abstract:The corrosion resistance of FRP-reinforced ordinary concrete members under the combined action of harsh environments (i.e., alkaline or acidic solutions, salt solutions) and freeze-thaw cycles is still unclear. To study the mechanical and apparent deterioration of carbon/basalt/glass/aramid fiber cloth reinforced concrete under chemical and freeze-thaw coupling. Plain concrete blocks and FRP-bonded concrete blocks were fabricated. The tensile properties of the FRP sheet and epoxy resin sheet before and after chemical freezing, the compressive strength of the FRP reinforced test block, and the bending capacity of the prismatic test block pasted with FRP on the prefabricated crack side were tested. The deterioration mechanism of the test block was analyzed through the change of surface photos. Based on the experimental data, the Lam-Teng constitutive model of concrete reinforced by alkali-freeze coupling FRP is modified. The results indicate that, in terms of apparent properties, with the increase in the duration of chemical freeze-thaw erosion, the surface of epoxy resin sheets exhibits an increase in pores, along with the emergence of small cracks and wrinkles. The texture of FRP sheets becomes blurred, and cracks and wrinkles appear on the surface. In terms of failure modes, as the number of chemical coupling erosion cycles increases, the location of failure in epoxy resin sheets becomes uncertain, and the failure plane tilts towards the direction of the applied load. The failure mode of FRP sheets remains unchanged. However, the bonding strength between FRP sheets and concrete decreases, resulting in a weakened reinforcement effect. In terms of mechanical properties, FRP sheets undergo the most severe degradation in the coupled environment of acid freeze-thaw cycles. Among them, GFRP experiences the largest degradation in tensile strength, reaching up to 30.17%. In terms of tensile performance, the sheets rank from highest to lowest as follows: CFRP, BFRP, AFRP, and GFRP.As the duration of chemical freeze-coupled erosion increases, the loss rate of compressive strength for specimens bonded with CFRP is the smallest (9.62% in salt freeze-thaw environment), while the loss rate of bearing capacity is higher for specimens reinforced with GFRP (33.8% in acid freeze-thaw environment). In contrast, the loss rate of bearing capacity is lower for specimens reinforced with CFRP (13.6% in salt freeze-thaw environment), but still higher for specimens reinforced with GFRP (25.8% in acid freeze-thaw environment).

Degradation of GFRP Bars with Epoxy and Vinyl Ester Matrices in a Marine Concrete Environment: an Experimental Study and Theoretical Modeling

Deterioration mechanism and hardness degradation for GFRP bars used in marine concrete structures

Durability Assessment of GFRP Bars Embedded in UHP-ECCs Subjected to an Accelerated Aging Environment with Sustained Loading

Durability Study on the Interlaminar Shear Behavior of Glass-Fibre Reinforced Polypropylene (GFRPP) Bars for Marine Applications

Long-Term Durability of Basalt- and Glass-Fibre Reinforced Polymer (bfrp/gfrp) Bars in Seawater and Sea Sand Concrete Environment

Modelling damage evolution of carbon fiber-reinforced epoxy polymer composites in seawater sea sand concrete environment

Physicochemical-mechanical simulation of the short- and long-term performance of FRP reinforced concrete beams under marine environments

Degradation factors and microstructure degradation characteristics of B/GFRP bars in harsh environment: A review

Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars

Investigation on damage evolution mechanism of various FRP strengthened concrete subjected to chemical-freeze-thaw coupling erosion

Study on the Durability of GFRP Bars and Carbon/glass Hybrid Fiber Reinforced Polymer (HFRP) Bars Aged in Alkaline Solution

Durability Study On Interlaminar Shear Behaviour Of Basalt-, Glass- And Carbon-Fibre Reinforced Polymer (B/G/Cfrp) Bars In Seawater Sea Sand Concrete Environment

Durability and microstructure degradation mechanism of FRP-seawater seasand concrete structures: A review

GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism

Degradation of Basalt Fiber–reinforced Polymer Bars in Seawater and Sea Sand Concrete Environment

Durability assessment of GFRP bars exposed to combined accelerated aging in alkaline solution and a constant load

Tensile behavior and durability prediction of GFRP-steel composite bars under chloride environments

Evaluation of Tensile Strength Degradation of GFRP Rebars in Harsh Alkaline Conditions Using Non-Linear Genetic-Based Models

Study on the durability of compression behavior for glass fiber‐reinforced polypropylene thermoplastic composite bars in various aging environments

Deterioration Modelling of Gfrp-Reinforced Cement-Based Concrete Infrastructure in Service under the Natural Inland Atmospheric Environment

Bond Performance of Alkaline Solution Pre-Exposed FRP Bars with Concrete