Abstract:Concrete in coastal areas is susceptible to structural damage caused by corrosion and expansion of reinforcement. Near‐surface mounted (NSM) fiber‐reinforced polymer (FRP) bars have become effective for strengthening damaged reinforced concrete structures. The bonding performance of NSM FRP bars in concrete is a key factor limiting their application and promotion in civil engineering. In this study, the influences of the conditioned environment, such as the chloride salt concentration, immersion time, and bond length of the FRP bar, on the bonding performance were investigated experimentally. First, material properties in a conditioned environment were studied. Subsequently, the failure mode, bond stress–slip curve, and bond strength of the NSM FRP bar in concrete were investigated. Finally, the microstructure and chemical composition of the materials were revealed using scanning electron microscopy and energy‐dispersive spectroscopy (EDS) images of the materials under environmental conditions. The transfer mechanism of NSM FRP bars in concrete with epoxy was revealed. The results showed that the failure modes of the pullout specimens can be divided into epoxy splitting failure and basalt fiber‐reinforced polymer (BFRP) pulling failure. The chloride‐salt concentration was a critical factor affecting the bond properties, and the longer the bond length, the lower the bond strength. The microstructure clearly shows that the degradation of the bonding behavior at the interface of the NSM FRP bar in concrete in a conditioned environment is attributable primarily to the resin damage of the epoxy, resulting in pit corrosion. There was no significant damage to the fibers in the FRP bar, and the degradation was primarily due to resin matrix damage and interfacial debonding. The EDS results showed that the degradation of the epoxy resin and BFRP bars was caused by CO bond and SiO bond fractures, respectively.

Bond Performance of Alkaline Solution Pre-Exposed FRP Bars with Concrete

Bond Durability of BFRP Bars Embedded in Concrete under Seawater Conditions and the Long-Term Bond Strength Prediction

Basic Development Length Of Basalt Fiber Reinforced Plastic Bar In Engineered Cementitious Composite

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Experimental Study on Bond Performance of Carbon- and Glass-Fiber Reinforced Polymer (CFRP/GFRP) Bars and Steel Strands to Concrete

Durability of Frp Concrete Bonds and Its Constituent Properties under the Influence of Moisture Conditions

Bond of FRP bars in fine‐grained alkali‐activated concrete

Experimental Study on Bond Behaviour Between Bfrp Bar and Engineered Cementitious Composite

Study on the Durability of GFRP Bars and Carbon/glass Hybrid Fiber Reinforced Polymer (HFRP) Bars Aged in Alkaline Solution

Bond performance of NSM FRP–concrete interfaces with epoxy under chloride‐salt conditioned environments

Durability assessment of GFRP bars exposed to combined accelerated aging in alkaline solution and a constant load

Bond behaviour of recycled aggregate concrete with basalt fibre-reinforced polymer bars

Durability Performances of Carbon Fiber-Reinforced Polymer and Concrete-Bonded Systems under Moisture Conditions

Research on bond properties between fiber reinforced polymer(frp) bar and concrete

Discussion on Bonding Performance between FRP Bars and Concrete

Experimental Study on the Bond Performance between Fiber-Reinforced Polymer Bar and Unsaturated Polyester Resin Concrete

Bond behavior of basalt fiber reinforced polymer bars in seawater sea-sand concrete exposed to daily temperature variations

Bar surface treatment effect on the bond-slip behavior and mechanism of basalt FRP bars embedded in concrete

Influence of Water on Shear Bond Properties of FRP-concrete Interfaces

Durability of components of FRP-concrete bonded reinforcement systems exposed to chloride environments

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete