Abstract:Traffic loads are the primary external loads on bridges during their service life. However, an accurate analysis of the long-term effect of the operating traffic load is difficult because of the diversity of traffic flow in terms of vehicle type and intensity. This study established a traffic load simulation method for long-span bridges based on high authenticity traffic monitoring data, and an improved k-means clustering algorithm and Correlated variables Sampling based on Sobol sequence and Copula function (CSSC) sampling method. The monitoring traffic data collected through a weigh-in-motion (WIM) system was processed to generate a multi-lane stochastic traffic flow. The dynamic response of a prototype suspension bridge under a traffic load was analyzed. The results show that the traffic load can be divided into clusters with identical distribution characteristics using a clustering algorithm. Combined with CSSC sampling, the generated traffic flow can effectively represent daily traffic and vehicle characteristics, which improves the accuracy of the assessment of the loads long-term effect. The dynamic response of the bridge to different traffic flows varied significantly. The maximum and minimum vertical displacement of the main girder was 0.404 m and 0.27 m, respectively. The maximum and minimum bending stresses of the short suspender were 50.676 MPa and 28.206 MPa, respectively. The maximum equivalent bending stress and axial stress were 16.068 MPa and 10.542 MPa, respectively, whereas the minimum values were 9.429 MPa and 8.679 MPa, respectively. These differences directly influence the short and long-term evaluation of bridge components. For an accurate evaluation of the bridge operation performance, the traffic flow density must be considered.

Investigation of the Vehicle Axle Load on Chongqing Area's Highway Bridge

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Site-Specific Fatigue Load Spectrum for Urban Bridges

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

A computational method for the dynamic load in heavy-vehicle bumping at the bridge expansion joint and analysis of the influencing factors

WIM Based Vehicle Load Model for Urban Expressway Bridges

Measurement-Based Vehicle Load Model for Urban Expressway Bridges

WIM-based vehicle load models for urban highway bridge

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

A Study on Assessment Method of Traffic Load Effect of Bridge in Service

Theory and Empirical Analysis of Bridge Load Limitation under the Action of Typical Heavy-Duty Vehicles

Study On Fatigue Traffic Loading For Highway Bridges In China

Vehicle survey and local fatigue analysis of a highway bridge

Research on Probabilistic Model of Vehicle Loads on Express Way

Traffic Load Modeling Based on Structural Health Monitoring Data

THE SAFETY ASSESSMENT OF BRIDGE IN HEYUAN CITY UNDER SUPER-LOAD

Application Of Strain Time Histories Measurement In Fatigue-Load Model Of Highway Bridges

Multi-Lane Traffic Load Clustering Model for Long-Span Bridge Based on Parameter Correlation

Fatigue load model of orthotropic steel deck for port highway in China

Study On Effect Of Traffic Loading On Fatigue Reliability For Steel Highway Bridges In China

Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory