Abstract:A combined analytical and experimental approach is presented to characterize mixed-mode fracture of hybrid material bonded interfaces under four-point bending load, and closed-form solutions of compliance and energy release rate (ERR) of the mixed-mode fracture specimens are provided. The transverse shear deformations in each sublayer of bimaterial bonded beams are included by modeling the specimen as individual Timoshenko beams, and the effect of interface crack-tip deformation on the compliance and ERR are taken into account by applying the interface deformable bilayer beam theory (flexible-joint model). The higher accuracy of the present analytical solutions for both the compliance and ERR of mixed-mode fracture specimens is manifested by comparing them with the solutions predicted by the conventional beam theory (CBT) and finite-element analysis (FEA). As an application example, the fracture of wood-fiber-reinforced plastic (FRP) bonded interface is experimentally evaluated by using mixed-mode fracture specimens [i.e., four-point asymmetric end-notched flexure (4-AENF) and four-point mixed-mode bending (4-MMB)], and the corresponding values of critical ERRs are obtained. Comparisons of the compliance rate change and the resulting critical ERR based on the CBT, the present theoretical model, and FEA demonstrate that the crack-tip deformation plays an important role in accurately characterizing the mixed-mode fracture toughness of hybrid material bonded interfaces under four-point bending load. DOI: 10.1061/(ASCE)AS.1943-5525.0000032. (C) 2011 American Society of Civil Engineers.

Fracture Parameters Analysis for Nonlinear Geometric of Integrally Stiffened Panel

Calculating and Analyzing of J-integral in the Center-Crack Ed Panel

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Effect of interfacial energy combined with geometrical nonlinearity on the finite fracture analysis of composite single-lap joints

The Study on J-Integral of Composite Laminated Plate Crack Propagation Problem

Ultimate Strength Characteristic and Assessment of Cracked Stiffened Panel under Uniaxial Compression

Two-parameter Fracture Prediction for Cracked Plates under Bending

DYNAMIC FRACTURE MECHANICS ANALYSIS FOR ANTIPLANE CRACKS IN NONHOMOGENEOUS COMPOSITE MATERIAL

Size-dependent Fracture and Higher Order J-integral for Solids Characterized by Strain Gradient Elasticity

Dynamic Fracture Mechanics Analysis for Composite Material with Material Non-Homogeneity in Thickness Direction

J-Integral Evaluation for Interface Crack of Bimetal Loaded by Normal Three-Point Bending(Modeling & Simulation)

Elastic-Plastic Fracture Behavior Analysis On A Griffith Crack In The Cylindrical Three-Phase Composites With Generalized Irwin Model

On Elastic–plastic Fracture Behavior of a Bi-Layered Composite Plate with a Sub-Interface Crack under Mixed Mode Loading

Ultimate strength of stiffened panels with a crack and pits under uni-axial longitudinal compression

Numerical Investigations to J-integral in Cracked Weldment Containing Damage Based on Finite Element Method

Ultimate Fracture Strength Analysis of Thin Rectangular Plate with Inclined Center Crack

Transverse Cracking of Orthotropic Composite Laminates: a Fracture Mechanics Approach

Constraint evaluation and effects on selected fracture parameters for single-edge notched beam under four-point bending

STUDY ON DIRECT EVALUATION OF J-INTEGRAL OF SURFACE CRACK IN WELDMENTS

Large Deflection Resistance and Fracture of Panels Subjected to the Lateral Penetration

Fracture Analysis Of Jointed Rock Mass Based On Nonlinear Fem And Physical Experiment