Abstract:The size effect in the fracture of solids represents a highly critical issue with a prolonged history of research. The size effect of traditional quasi-brittle materials can already be well described through the size effect model. However, there is still a lack of research on the size effect of strain-hardening cementitious composites (SHCC), a special type of fibre-reinforced concrete with macro-scale strain-hardening behaviour after first cracking. Being distinct from traditional quasi-brittle materials with softening nature, SHCC is thus expected to behave differently in terms of size effect. In this research, the structural size effect problem of SHCC is comprehensively studied by experimental investigation and theoretical analysis. Geometrically similar notched three-point bending specimens were tested in mode I and mixed mode I/II fracture condition. The whole-process of failure and matrix cracking zone around the main crack was captured with high resolution by digital image correlation technology. Experimental results showed that apparent fracture energy, nominal strength, structural ductility and fracture resistance curve are all structural size-dependent. The apparent fracture energy was shown to arise with specimen size within the tested range. This is related to large-scale pseudo yielding, i.e. enlargement of matrix cracking zone (like the yielding zone in metals) with increasing structural size. It thus provides an indirect method for the estimation of cohesive fracture energy of single crack with constitutive nature. Due to the scaled matrix cracking zone, an intermediate asymptote exists in the size effect curve of nominal strength, in addition to the plastic and LEFM asymptotes in the Bažant original size effect law. This resembles the recent finding of intermediate asymptote in plastic-hardening metal( Dönmez et al. 2023 ). The size-dependence of R-curve was also examined. Though size-dependent, the equivalent LEFM-based R-curves are shown to have three common stages reflecting different cracking processes. Based on experimental results, the size effect of fracture energy and nominal strength are finally modelled theoretically in the Bažant's framework of equivalence between energy release and fracture resistance.

Size-dependent Fracture and Higher Order J-integral for Solids Characterized by Strain Gradient Elasticity

Analysis of Size Effects Based on A Symmetric Lower-Order Gradient Plasticity Model

Size effects in micro and nanoscale materials fracture

Large Deformation and Strain Gradient Fracture Analysis of Double Cantilever Beams with Piezoelectric Effect

Structural size effect in the mode I and mixed mode I/II fracture of strain-hardening cementitious composites (SHCC)

Hyperelasticity Governs Dynamic Fracture at A Critical Length Scale

Investigations of Size Effects in Tensile Tests Based on a Nonlocal Micro-Mechanical Damage Model

Mechanics of structural size effect in impact brittle fracture of steels and consequent scaling laws for fracture

Bending and Fracture Properties of Small Scale Elastic Beams – A Nonlocal Analysis

Specimen size effect on the fracture energy of architected stretchable materials

Large Strained Fracture of Nearly Incompressible Hyperelastic Materials: Enhanced Assumed Strain Methods and Energy Decomposition

A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation

On the effects of material strength in dynamic fracture: A phase-field study

The Physical Meanings of Two Incremental-J-integral-based Fracture Criteria for Crack Growth in Elastic-Plastic Materials

Hyperelastic effects in brittle materials failure

Size-dependent fracture in elastomers: experiments and continuum modeling

Size-dependency and lattice-discreetness effect on fracture toughness in 2D crystals under antiplanar loading

A finite-element discretization of some boundary value problems for nonlinear strain-limiting elastic bodies

Size effects in fatigue crack growth in confined volumes: A microbending case study on nc Ni

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel