Abstract:A combined analytical and experimental approach is presented to characterize mixed-mode fracture of hybrid material bonded interfaces under four-point bending load, and closed-form solutions of compliance and energy release rate (ERR) of the mixed-mode fracture specimens are provided. The transverse shear deformations in each sublayer of bimaterial bonded beams are included by modeling the specimen as individual Timoshenko beams, and the effect of interface crack-tip deformation on the compliance and ERR are taken into account by applying the interface deformable bilayer beam theory (flexible-joint model). The higher accuracy of the present analytical solutions for both the compliance and ERR of mixed-mode fracture specimens is manifested by comparing them with the solutions predicted by the conventional beam theory (CBT) and finite-element analysis (FEA). As an application example, the fracture of wood-fiber-reinforced plastic (FRP) bonded interface is experimentally evaluated by using mixed-mode fracture specimens [i.e., four-point asymmetric end-notched flexure (4-AENF) and four-point mixed-mode bending (4-MMB)], and the corresponding values of critical ERRs are obtained. Comparisons of the compliance rate change and the resulting critical ERR based on the CBT, the present theoretical model, and FEA demonstrate that the crack-tip deformation plays an important role in accurately characterizing the mixed-mode fracture toughness of hybrid material bonded interfaces under four-point bending load. DOI: 10.1061/(ASCE)AS.1943-5525.0000032. (C) 2011 American Society of Civil Engineers.

Dynamic Fracture Mechanics Analysis for Composite Material with Material Non-Homogeneity in Thickness Direction

Cracks problem for non-homogeneous composite material subjected to dynamic loading

DYNAMIC FRACTURE MECHANICS ANALYSIS FOR ANTIPLANE CRACKS IN NONHOMOGENEOUS COMPOSITE MATERIAL

Multiple crack problem in nonhomogeneous composite materials subjected to dynamic anti-plane shearing

Finite Element Analysis of Crack Dynamic Response in Gradient Non- Homogeneous Finite Plate

Thermoelastic Fracture Mechanics for Nonhomogeneous Material Subjected to Unsteady Thermal Load

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Crack Problems for Functionally Graded Materials under Transient Thermal Loading

Transverse Cracking of Orthotropic Composite Laminates: a Fracture Mechanics Approach

Coupled Thermal/Mechanical Analysis for the Fracture of Functionally Graded Materials under Transient Thermal Loading

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Dynamic response for non-homogeneous piezoelectric medium with multiple cracks

Fracture Mechanics for Multilayers with Penny-Shaped Cracks Subjected to Dynamic Torsional Loading

Dynamic Response for Functionally Graded Materials with Penny-Shaped Cracks

Functionally Graded Penny-Shaped Cracks under Dynamic Loading

Explanation of Strain Softening and Numerical Modeling to the Failure Process of Laminated Composite Material

Dynamic Stress Intensity Factors of a Semi-Infinite Crack in an Orthotropic Functionally Graded Material

A Non-Local Fracture Model for Composite Laminates and Numerical Simulations by Using the FFT Method

A hybrid thermo-mechanical phase-field model for anisotropic brittle fracture