Abstract:A new high efficient and non-destructive mental activation process of electroless composite plating was proposed. The process utilized electromagnetic induction equipment to heat the titanium alloy substrate and used its energy to complete the activation process, which could successfully attach the nickel nanoparticles firmly to the surface of the titanium alloy; at the same time, the process pre-activated Al2O3 nanoparticles and added the activated nanoparticles to the plating solution. In the process of plating, the activated titanium substrate was used as the catalytic center of electroless nickel plating (ENP) for electroless composite plating. The new activation process avoided complicated traditional processes such as acid etching and zinc dipping. Such traditional processes require huge doses of chemicals, including various strong acids, so improper waste liquid treatment will cause harm to the environment. The important parameters of the process were optimized by orthogonal experiments. A scanning electron microscope (SEM), an X-ray photoelectron spectroscopy (XPS), an energy dispersive spectrometer (EDS), thermal shock experiments and friction and wear experiments were used to characterize and analyze the surface morphology, composition, binding force and friction coefficient of the coating, and analyze the coating quality by measuring the plating rate and the thickness of the coating. The results showed that the rate of electroless composite plating increased with the increase in Al2O3 nanoparticle concentration. When the concentration of Al2O3 nanoparticles reached 1.5 g/L, the ENP rate decreased with the increase in Al2O3 nanoparticle concentration. The adhesion of the sample was evaluated by the scratch test, which showed that the binding grade of the sample was 0, and the Vickers hardness was 688.5 HV. Results showed that the coating produced by this new process has excellent performance. Therefore, the process is an environmentally friendly and fast activation composite plating process.

Investigation on the Composite Plating for Non-corrosive Steel-based

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Technology for Ni-Al2O3 Composite Coating and Its Properties

Investigation of the Tribological and Mechanical Properties of Electroless Ni-P-hBN Nano-Composite Coating

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Electroplating of HAp-brushite coating on metallic bioimplants with advanced hemocompatibility and osteocompatibility properties

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel

Study on Ni-P-nanoTiN Electroless Composite Coating

A New Process for Efficient Non-Destructive Metal-Activated Composite Plating of Ni-P-Al2O3 on Titanium Base and Its Performance Research

Preparation of laminar α-ZrP nanosheets enhanced Ni W nanocomposite coating and investigation of its mechanical and anti-corrosion properties

Mechanically Assisted Electroless Barrel-Plating Ni-P Coatings Deposited on Carbon Steel

Characterization and corrosion behavior of electroless Ni-Mo-P/Ni-P composite coating in CO2/H2S/Cl− brine: Effects of Mo addition and heat treatment

Preparation and Properties of Ni–W Composite Coatings Reinforced by Graphene Nanoplatelets

Study of properties of Ni-base nano-ZrO2 composite plating coatings

Study on Properties of Double-Layered Ni–P–Cr Composite Coating Prepared by the Combination of Electroless Plating and Pack Cementation

Studies on nano-hybrid biopolymer composite coating on corroded steel to improve the corrosion resistance and hydrophobicity of the surface

Effect of Heat‐Treatment and NiB–TiO2 Composite Coating on the Tribological Performance of AISI P20 Steel

Comparative Study of Biotin and Hydroxyapatite on Biological Properties of Composite Coating

Effect of hydroxyapatite/alumina composite coatings using HVOF on immersion behavior of NiTi alloys