Abstract:Templating platinum group metal (PGM) nanostructures from microphase separated block copolymers (BCPs) allows for electrocatalytic activity to be studied on highly ordered, model surfaces with precisely controlled feature sizes and morphologies, thereby allowing catalyst electroactivity and stability to be probed as a function of nanoscale geometry. In our previous work [1], BCP templated electrocatalysts fabricated via incipient wetness impregnation of PGM precursors were tested for hydrogen oxidation/evolution and water-splitting activity on interdigitated electrodes using liquid and solid polymer electrolytes. This talk presents the fabrication of such electrocatalysts via Atomic Layer Deposition (ALD) and Physical Vapor Deposition (PVD) techniques (e-beam evaporation and sputtering). Self-assembled lamellae of poly-(styrene-block-methylmethacrylate) (PSbPMMA) thin films on Si wafer and glassy carbon substrates were subjected to 5 - 15 ALD cycles with trimethylaluminium (TMA) precursor to induce selective growth of alumina in the PMMA domains via Sequential Infiltration Synthesis. Thereafter, the polymer template was removed via Reactive Ion Etching (RIE) with oxygen plasma. The resultant alumina nanostructures templated from self-assembled PSbPMMA was then used as a substrate either for Platinum ALD with (trimethyl)methylcyclopentadienylplatinum(IV) precursor atop a Titanium Nitride adhesive layer, or for sputtering of Pt atop a Ti adhesive layer to obtain conformal Pt coatings of up to 20 nm in thickness. When e-beam evaporation was used, The PMMA domains were selectively removed by successive wet and dry etch steps, followed by deposition and lift-off. The PGM electrocatalyst nanostructures were characterized via a combination of electron microcopy, X-ray diffraction, and X-ray photoelectron spectroscopy, and the Pt content of the catalysts were determined via microwave leaching and digestion of the electrocatalyst thin film followed by Inductively Coupled Plasma Mass Spectroscopy. The nanostructured electrocatalysts were tested for oxygen reduction (ORR) activity in a conventional rotating disk electrode setup using 0.1 M perchloric acid electrolyte, and the ORR mass activities and active surface area were obtained. [1] Bhattacharya, D., Arges, C. G., et al., Small, 2021, 17, 2100437

Stamping Platinum Electrodes – Design, Fabrication, and Characterization

A reproducible electropolishing technique to customize tungsten SPM probe: From mathematical modeling to realization

Elevating Platinum to Volumetric Capacitance: High Surface Area Electrodes through reactive Pt sputtering

Shape-controlled fabrication of platinum electrocatalyst by pulse electrodeposition

Fabrication of Block Copolymer Templated Extended Surface Model Electrocatalysts By Atomic Layer Deposition and Physical Vapor Deposition

Exploration of defined 2-dimensional working electrode shapes through additive manufacturing

Extended-Surface Thin-Film Platinum Electrocatalysts with Tunable Nanostructured Morphologies

Fuel cell electrodes from organometallic Pt precursors: an easy atmospheric plasma approach

Fabrication and Characterization of Platinum-Iridium Electrodes with Micro-Structured Surfaces For Neural Stimulation Applications

Ultrathin platinum-group metal coated hierarchical flowerlike gold microstructure: Electrochemical design and characterization

Surface modification of neural stimulating/recording electrodes with high surface area platinum-iridium alloy coatings

High Surface Area Nanoporous Platinum: Facile Fabrication and Electrocatalytic Activity

A Study of the Long-Term Electrochemical Stability of Thin-Film Titanium–Platinum Microelectrodes and Their Comparison to Classic, Wire-Based Platinum Microelectrodes in Selected Inorganic Electrolytes

Fabrication of high-aspect-ratio platinum probes by two-step electrochemical etching

Print-and-plate architected electrodes for electrochemical transformations under flow

Electrically conducting diamond films grown on platinum foil for neural stimulation

Mastering the surface strain of platinum catalysts for efficient electrocatalysis

Platinum Black for stray-light mitigation on high-aspect-ratio micromechanical cantilever

Comprehensive Characterization of Porous Transport Electrodes with SEM, XPS, and Tof-SIMS

Electrochemical Surface Treatment for Tailored Porous Structures

Investigating the platinum electrode surface during Kolbe electrolysis of acetic acid