The Design of the Control System of the Auto Glasscutter

Yanwei Wen

2000-01-01

Abstract:The automatic control system of the glasscutter using microcomputer and MELSEC FX 2N programmable logical contoller is introduced.It shows that what the system is composed and how to applicate the method of control. The flow chart of the system control is also shown in this paper.

What problem does this paper attempt to address?

The Design of the Control System on the Upper Computer of the Cutting Machine

Zhi-peng LI,Xing-gen LI

DOI: https://doi.org/10.3969/j.issn.1005-2895.2006.03.031

2006-01-01

Abstract:The paper describes the application of the cutting machine and the vector converter in the cutting machine.The control system was designed based on the cutter equipment.The control system was compiled by Delphi.And the paper also discussed the real-time serial communication between the cutting machine and the upper computer.
Design and Application of Distributed Control System for High Speed Paper Machine

Chun-jie YANG

DOI: https://doi.org/10.3969/j.issn.1000-3932.2001.01.002

2001-01-01

Abstract:This paper describes the design and application of DCS control system for high-speed paper machine.The content includes system design demand,hardware structure,software development and the control algorithms of several main control loops.The result shows that the system,which has high stability,reliability and control quality,attains the requirement of manufacture craft.
Host Computer Software Design of Control System of Ultra-magnetostrictive Boring-cutting Processing Non-circular Cylindrical Hole

Yue WANG,Yi-jie WU

DOI: https://doi.org/10.3969/j.issn.1005-2895.2010.06.025

2010-01-01

Abstract:This paper designs the host computer software of control system of ultra-magnetostrictive boring-cutting processing non-circular cylindrical hole.Based on LabVIEW software graphical programming language,a human-computer interface and data pre-processing module are designed,using uniform angle approaching method to handle elliptic curve of non-circular cylindrical hole cross-section.The communication protocol between host computer and slave computer of the control system and the RS-232 serial communication program are designed.
Test_bed Design for Automobile Window\'s Glass Lifter

XU An-ding,HU Xiao-ping,YANG Shi-xi

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.08.006

2005-01-01

Abstract:This paper mainly introduces the Test-bed characters and it's function obtained.Take out the detailed soft and hardware design for the glass lifter parameters' data sampling based on the Micro controller; Having a introduce of sensors' principle and Apply character which involved and give the information frame of communicate between PC and Micro controller;The device put into practice indicates that it has obtained the design demand.
Development of Application Software of Open Numerical Control Shoe Last Machine Tool System

LI Xiaolei,HU Xuefen,JIN Tao,TONG Shuiguang

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.02.063

2006-01-01

Abstract:Based on industry PC and domestic GT400-SV multiaxis motion control card,a new open architecture numerical control shoe last machine tool was developed.The components of system hardware were proposed,and the structure of NC system application software was discussed.The software was designed and developed in the WINDOWS environment.Practicability and characteristics of open architecture were proved when shoe last machining on the control of the NC systems.
Design of Automatic Pattern Laser-Cutting System Based on DSP Control

Shuixiu JIANG,Senlin ZHANG,Jianjun YIN

DOI: https://doi.org/10.3969/j.issn.0253-9721.2012.05.025

2012-01-01

Abstract:To achieve high speed clothing cutting with high control precision,the control system for cutting automatically by laser is developed.Taking advantages of digital signal processor TMS320F2812′s rich hardware resources,the system improved laser cutting technology and tangent motion interpolation algorithm.Based on laser cutting principle and general design ideas of auto-cutting system,the mechanical structure with hardware and software is developed for the cutting control system.It involved secure digital card storage and FAT32 file management process,realizing the transmission of files for trajectory control.The results indicated that this automatic laser-cutting system fulfils cutting more exactly and efficiently.Compared with conventional products,it deleted the vibration from mechanical cutter,meanwhile improving the work efficiency and quality for clothing cutting or pattern cutting.
The Design of Metallographical Cutter Autocontrol System Based on AT89S52 Single Chip Microcomputer

SUN Yao-jie,YIN Fei-xing,GAO Li-zhe,CHEN Shu-ping

DOI: https://doi.org/10.3969/j.issn.1001-2257.2007.01.017

2007-01-01

Abstract:In this paper,we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.To the point,the selections of cutting speed and model depend on the metallic attributes,in order to avoid damaging the structure and characteristic of the metal.The applications prove that the design is excellent and the system has the advantages of perfect practicability,convenience manipulation,stabilize performance and high reliability.In practice courses,the control accuracy can meet the challenge.
Control System Design of High Speed Industrial Zigzag Stitching Machine

刘峙飞,黄海,韩安太,刘天泉,王树青

DOI: https://doi.org/10.3969/j.issn.1001-3881.2004.07.058

2004-01-01

Abstract:A control system based on TMS320LF2407A DSP and Winbond 78E52 microcontroller was designed for the high speed industrial zigzag stitching machine. With the movement of two-bar linkage, the whole system offers excellent responsiveness and allows the machine to create many patterns with high speed.
Automatic Control System Design and Realization of Latex Polymerization Process

GAO Feng,WANG Xin,WU Jun-qiang,XIONG Li,LIANG Jun

DOI: https://doi.org/10.3785/j.issn.1006-754x.2006.06.003

2006-01-01

Journal of Engineering Design

Abstract:Automatic Control system has been widely used in the field of modern chemical production industry,which not only enhances the automatic level of production device but also elevates products' quality and output.A method combining manufacture process monitoring system and PLC is presented,through which automatic control system of a set of device for latex polymerization is developed and automatic control and monitoring function of the whole manufacture process are realized.For the key factor influencing quality best-polymerization temperature,cascade with stroke-dividing control algorithm is applied.Through long-term practical running,control effect reaches the expectation,which demonstrates the feasibility of this control system.
Design of Computer Control System for Gas Phase Copolymerization of Olefin Based on PLC

SUN Xiao-fang,PAN Hai-tian,XIA Lu-yue,CAI Yi-jun,FAN Hong

DOI: https://doi.org/10.3969/j.issn.1002-4956.2007.09.018

2007-01-01

Abstract:A computer control system was established by online instrumentation and control valve,programmable logic controller,industrial personal computer and configuration software for a novel laboratory reactor system for gas phase copolymerization of olefin in this work.The computer control system has the functions of online supervision,auto control,system management,etc.,which also has the characteristics of modularized structure,convenient operation,reliable capability,strong visualizability and better effect in experimental teaching and research for students.
Design Of Automatic Control System Of Metallographic Polishing Machine

Jia Jinglei,Sun Yaojie,Lv Guangshi

2008-01-01

Abstract:Metallographic polishing machine is widely used in many industries including metal, alloy, and aviation for grinding and polishing metallographic samples. The working principle and experimental results of the polishing machine are described in the paper. In the control system, a microcontroller C80151F330D is chosen as the core control chip, liquid crystal display (LCD) LCM12864ZK is used for real time display, and the keystroke is used for regulating polishing time, polishing pressure and adjusting rotational velocity. The innovative design has improved the control precision of the metallographic polishing machine and enhanced the adaptability and stability of the system when cutting various types of materials. The experiments indicated that the system meets users' requirements and has good stability and reliability.
Metallographic Cotter Control System Based on Touch Screen and PLC

孙耀杰,赵君,贾静蕾,白明智,张保敬

DOI: https://doi.org/10.3969/j.issn.1004-373x.2009.14.064

2009-01-01

Abstract:A principle of metallographic cutter control system based on touching screen and PLC is introduced.The control system chooses PLC as core control chip,emploies touching screen for setting the cutting parameters and real-time display,and uses frequency-converter based on USS protocol to realize the well setting of the grinding wheel speed and the self-adaptation of the work piece cutting speed.the control precision of the metallographic cutter is improved and the adaptability and stability of the system when cutting various types of materials are enhanced.The experiments indicate that the system meets users′ requirements and runs stable and reliable.
The study of CAD/CAM system of super CNC glass carve center

曾伟梁,吴一高,傅建中,刘颖

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.03.006

2003-01-01

Abstract:Object-oriented technology is used to study the CAD/CAM system of super CNC glass carve center in this paper. Based on a successful development of the CAD/CAM system on the OS of WINDOWS, Modular organization in the CAD/CAM system and the detail process of figure forming are presented. It has been proved that the developed CAD system of glass carve robot that is accurate and effectively , and is very successful by a great deal of practice.
Study and Development of Automatic Control System for Chamfering Machine Based on PLC

WU Yan-ming,WU Bin,ZANG Fu-hai,ZHU Jia-cheng,WU Tian-xing

DOI: https://doi.org/10.3969/j.issn.1001-2265.2011.12.017

2011-01-01

Abstract:Influenced by scaling?off cutting, to the mass produced rods and steel tube blank, the phenomena of burr and flashing are found. If the parts are processed by manual chamfering and lathe, it is tremendously labor intensive and low efficiency. To solve the problem, an efficient double?headed automatic chamfering machine was designed based on PLC control. The structural components of the chamfering machine were introduced , the gas?liquid control diagram and the electric control schematic figure including the flow chart of software programming were described in detail. The practices have proven productivity and end quality are improved greatly be?cause the chamfering machine can be used to realize double end continuous processing although loading once.
Design on the Control System of Automatic Water Door

周劲松

DOI: https://doi.org/10.3969/j.issn.1671-5004.2004.02.005

2004-01-01

Abstract:The paper introduces the development method of the automatic water door in sum.The design means of the hydraulic system and the watercyclating system are depicted in detail. The design method and control principle of the control circuit diagram are analyzed at last.
Design of Controlling System in Electron Beam Selective Melting

JIANG Ming,QI Hai-bo,LIN Feng

DOI: https://doi.org/10.3969/j.issn.1001-3997.2008.01.077

2008-01-01

Abstract:By analyzing the controlling system function of electron beam selective melting, the PMAC motion controller is selected as a slave computer of the controlling system, which can not only control the four serve motion and several limit signals, but also can save and download the scanning data. Furthermore, the scanning data can be calculated and self-executed by the PMAC motion controller. Two years running effects showed that this controlling system has very high reliability.
Design of Control System of Computerized Embroidery Machine Based on DSP

Gangfeng Yan

2007-01-01

Abstract:The paper presents the design of the control system of computerized embroidery machine based on TMS320LF2407A chip and introduces the scheme of software and hardware.Using AC motor can reduce the cost.The system is outstanding with short implemental period,steady performance and strong function,and obtains the good result in production.
A Cutting Control System with Variable Scale and High Precision for Auto Silicon Steel Sheet Cutter

Shuguang Zhang,Fushun Wang,Xiaohua Sun,Limin Shao,Xiwang Wang

DOI: https://doi.org/10.3969/j.issn.1000-1298.2007.03.036

2007-01-01

Abstract:A FX2 PLC as master control unit combined with a MR-J2 servo motor, an orientation module and a servo amplifier to make a system. A motor was accurately controlled by using the features of position control and multistage velocity control of the servo motor through the form address orientation method and an optimization project of dual control for position and velocity was deduced. The duel control project ensures both the precision and the speed of the system. The system realized variable scale cutting, which met the requirement of special transformer. The operating tests indicated that of the cutter satisfied the technical specifications completely.
Development of Automatic Control System for Finishing of Precise Flat Steel

Dongbin Li,Peng Wang,Chao Liang,Shan Cong,Ying Li,Ting Chen

DOI: https://doi.org/10.1109/emeit.2011.6023369

2011-01-01

Abstract:In order to overcome the shortcomings of traditional finishing machines, such as low automation degree, bad reliability and more failures, the automatic control system for finishing of precise flat steel is developed based on PLC, touch screen and invert in this paper. The producing flow and control requirements of finishing precise flat steel are introduced. The control system is used to adjust the speed of equipment for finishing precise flat steel. Application of touch screen offers a better HMI. By adopting semi-closed control strategy response time is reduced and control accuracy is improved. The system has good effect in practice.
The Electronic Control System of Automatic Optical Scissors and Optical Tweezers

Yizhi Li,Shunquan Shen,Anpei Ye

DOI: https://doi.org/10.4028/www.scientific.net/amm.423-426.2894

2013-01-01

Applied Mechanics and Materials

Abstract:Optical tweezers and optical scissors is becoming a widely used technology. However, optical tweezers system that has been used, is not well automatic and convenient to operate. This article will introduce an automatic control system, mainly by describing the design, the composition and function of the system, which can automatically control each part of the entire platform by using a computer. The spatial resolution of the system has reached sub-nanometer level.

The Design of the Control System of the Auto Glasscutter

The Design of the Control System on the Upper Computer of the Cutting Machine

Design and Application of Distributed Control System for High Speed Paper Machine

Host Computer Software Design of Control System of Ultra-magnetostrictive Boring-cutting Processing Non-circular Cylindrical Hole

Test_bed Design for Automobile Window\'s Glass Lifter

Development of Application Software of Open Numerical Control Shoe Last Machine Tool System

Design of Automatic Pattern Laser-Cutting System Based on DSP Control

The Design of Metallographical Cutter Autocontrol System Based on AT89S52 Single Chip Microcomputer

Control System Design of High Speed Industrial Zigzag Stitching Machine

Automatic Control System Design and Realization of Latex Polymerization Process

Design of Computer Control System for Gas Phase Copolymerization of Olefin Based on PLC

Design Of Automatic Control System Of Metallographic Polishing Machine

Metallographic Cotter Control System Based on Touch Screen and PLC

The study of CAD/CAM system of super CNC glass carve center

Study and Development of Automatic Control System for Chamfering Machine Based on PLC

Design on the Control System of Automatic Water Door

Design of Controlling System in Electron Beam Selective Melting

Design of Control System of Computerized Embroidery Machine Based on DSP

A Cutting Control System with Variable Scale and High Precision for Auto Silicon Steel Sheet Cutter

Development of Automatic Control System for Finishing of Precise Flat Steel

The Electronic Control System of Automatic Optical Scissors and Optical Tweezers