Study of the Influence of Types of Dust Sources on the Dynamic Filtration Performance of Air Filtration Materials

Zhiyong Wu

2012-01-01

Abstract:With the dust in a power plant,500-mesh and 1250-mesh French chalk being chosen as three types of dust source respectively,tested were such dynamic dust removal performance indexes as the resistance of the filtration material used in a bag-type precipitator,average filtration cycle and efficiency etc.The statistics and analysis of a large quantity of the test data show that the types of dust sources have a relatively big influence on the resistance of the air filtration materials.Under the same conditions,the remaining resistance value of the filtration materials tested and obtained by using French chalk is obviously greater than that obtained by using the dust in a practical thermal power plant and the difference of the dust source also has a comparatively big influence on the average filtration cycle of the air filtration materials.A test was performed by using the dust in a thermal power plant,500-mesh and 1250-mesh French chalk respectively,the average filtration cycles in the initial stage were 28.2 min,19.0 min and 14.5 min respectively and those in the final stage were 28.7 min,8.3 min and 11.3 min respectively.These show that the average filtration cycle obtained by using French chalk in the test is obviously shorter and can reduce greatly the test duration,however,not yet objectively reflects the real filtration cycle characteristics of the filtration materials.The difference in the types of dust source has a certain influence on the filtration efficiency of the air filtration materials.The filtration efficiencies of the filtration materials in the initial stage obtained through a test by using the dust in a thermal power plant,500-mesh and 1250-mesh French chalk were 99.203%,99.642% and 99.870% respectively and those in the final stage were 98.250%,98.996% and 99.945% respectively.