Abstract:The escape of dust particles from dust-producing sources in welding, wood-, and crop-processing sites is hazardous for human health and can violate strict technological requirements. This study proposed artificial unloading of dust-producing links in tobacco plants and designed an air curtain dust-collecting system with large size of 2m × 2m × 2m. The dust was first isolated by air curtain jets produced by the air curtain generator and then driven away by the suction airflow on the top of the device to achieve the effective dust collection. The flow field characteristics in the dust-collecting system and smoke fine particles' capturing behavior were qualitatively analyzed via a tracer smoke. Moreover, the effects of the air curtain's jet velocity, angle, and the exhaust-to-pressure ratio (EPR) on the system's dust-collecting performance were experimentally evaluated. The airflow's entrainment and smoke exhaust capacity were improved with increased air supply and air suction quantities. At a total air supply and air suction quantities of 3706 and 4322 m3/h, respectively, the tracer smoke exhibited a pronounced columnar collecting state. Excessive and insufficient jet velocities were found inappropriate for the developed large-scale dust-collecting system. The optimal jet velocity range was determined as 12–15 m/s, with a corresponding air supply quantity range of 3110.4–3708 m3/h. Within a reasonable EPR range of 0.9–1.0, the efficient and cost-effective dust-collecting performance was achieved. As the jet angle increased, the system's dust-collecting efficiency dropped steadily, and a zero jet angle was optimal. The optimal parameters determined through the orthogonal experiment were as follows: jet velocity of 15 m/s, EPR of 1.0, and jet angle of 0°. Under the optimal parameter setting, the dust-collecting efficiency reached a maximum of 96.88%.

Study on the wet dust collection mechanism of metal-based filter screens and the effect of its inclination angle on dust removal performance

Study on the Influence Mechanism of Filtering Parameters in Wet Filtration Dust Removal System

Research on factors affecting the spread of dust pollution in conveyor belt workshop and research on wet dust reduction technology

Experimental Study on the Dust Filtration Performance with Participation of Water Mist

Research on dust dispersion law of fully mechanized mining faces under different inclinations and tracking closed dust control method

Development of a novel wind-assisted centralized spraying dedusting device for dust suppression in a fully mechanized mining face

Experimental investigation on filtration characteristic with different filter material of bag dust collector for dust removal

Removal of Dust Produced in the Roadway of Coal Mine Using a Mining Dust Filtration System

Experimental and numerical evaluation of the dust suppression efficiency of an innovative vortex pneumatic fog screen dust control device

Study of integrated vortex ventilation and dust removal system in mechanized excavation face

Research on negative pressure jet dust-removal water curtain technology for coal mine cleaner production

Effects of various humid environments on the filtration and dust cleaning performance of filter media

Research on the blowing-spraying synergistic dust removal technology for clean environment in large-scale mechanization coal mine

Study on the influence of built-in open-hole dust cleaner on the cleaning performance of cartridge filter

Air curtain dust-collecting technology: An experimental study on the performance of a large-scale dust-collecting system

Study on dust pollution suppression of mine wind-assisted spray device based on orthogonal test and CFD simulation

Research on air curtain dust control technology for environmental protection at fully mechanized working faces

Optimization of wind-and-water coordinated dust reduction device for coal mine return airway based on CFD technology

Effect of Moisture Content in Coal Dust on Filtration and Cleaning Performance of Filters

Experimental Study on the Dust-Cleaning Performance of New Structure Microporous Membrane Filter Plate

Effects of Filter Cartridge Wetted Before Filtration and During Filtration on the Performance of Cartridge Dust Collector