Abstract:The paper discusses technological solutions in the field of production and use of hydrogen fuel, the combustion of which, in a steam-oxygen environment, can significantly increase the initial parameters of the steam turbine cycle and, thus, increase the thermal efficiency of traditional steam turbine thermal power plants. A study of technologies for the industrial production of hydrogen has been carried out. An analysis of the technical and economic features of hydrogen production technologies for use in the electric power industry showed that the most promising method is electrolysis, which makes it possible to obtain inexpensive hydrogen during hours of low demand for electricity or cogeneration of heat and electricity when electricity is a by-product. It is shown that in order to increase the power and efficiency of steam turbine TPPs, it is important to use external steam superheating from an external source of thermal energy, thus providing intermediate overheating of the working fluid by connecting an additional cycle with a higher equivalent initial temperature to the main steam turbine cycle. We have established that if we use hydrogen as a thermal energy source, the absolute efficiency of the steam turbine cycle can be increased up to 54%, taking into account the regenerative heating of feed water. In this case, at an overheating temperature equal to tnn = 760 °C, the absolute efficiency of the cycle is virtually equal to that of a CCGT unit operating at the initial gas temperature t0 = 1350 °C. At the same time, while maintaining the boiler performance, the rated capacity of the steam turbine power unit is increased by 12%. In addition, the study pays attention to the problem of increasing the power consumption of TPPs for the auxiliaries, as required to compress hydrogen and oxygen up to a pressure higher than that in the steam pipeline where the combustion chamber is installed. Our calculations have allowed us to conclude that, for the case of installing the combustion chamber in live steam, the share of additional power spent for auxiliaries should be 7%, whereas the main share of power is consumed for compressing hydrogen—94%. Despite the identified shortcomings, an economic analysis of the process of hydrogen production at TPP by electrolysis and its further use for intermediate overheating in steam turbines in order to increase their efficiency showed the effectiveness of this solution.

Influencing Factors and Treatment of Generator's Hydrogen Purity in 600MW Unit

Circulating Efficiency Test of Domestic 600MW Units and Their Performance Optimization Analysis

Review on Key Technology of Operation and Maintenance for Gas-Steam Combined Cycle Power Generating Units

The Analysis of UHV Transmission’s Impact on Steam Turbine Operation

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

The Influence of Purifier Models on Hydrogen Network Optimization: Insights from A Case Study

Prelindnary Study On Practical Hydrogen Generation, Storage And Delivery For Pem Fuel Cell In China

The Improvement of Double Pressure Condenser Optimum Vacuum and Operation Optimization for 600MW Power Units

Analysis and optimized measures for the energy conservation and consumption reduction of 600 MW thermal power units

Study on wide power characteristics of water electrolysis hydrogen production plant under fluctuating hydrogen production conditions

Comprehensive Measures of Steadily Operating Hydroturbine Generator Units in Wanjiazhai Yellow River

Experimental design on performance improvement of the helium purification system of HTR 10

Main Affecting Factors of Hydrogen and Oxygen Hybrid Cycle Efficiency

Insights into electrochemical hydrogen compressor operating parameters and membrane electrode assembly degradation mechanisms

Multi-objective optimization of hydrogen production system based on the combined supercritical cycle and gas turbine plant

Electrical Design for Hydrogen Preparation Station of Generating Power Plants

Design and Internal Flow Characteristic Investigation of High-Temperature H2/Steam-Mixed Working Fluid Turbine

Helium purifying and regenerating system and method for high-temperature gas cooled reactor optimization

Technological Solutions in the Field of Production and Use of Hydrogen Fuel to Increase the Thermal Efficiency of Steam Turbine TPPs

Hydrogen Network Synthesis Integrated with Multi-Stage and Multi-Technology Purification System

Study on energy saving and environmental protection generator with hydrogen–oxygen–gasoline compound fuel