Abstract:Multi-signal calibrations have been recently exploited in molecular spectrochemical analysis alternatively to traditional calibration methods, improving analytical frequency and accuracy. The application of these strategies is simple and minimizes efficiently matrix effects by analyzing two calibration solutions comprising sample plus standard (S1), and sample plus blank (S2). The plot of the signals obtained with S1 and S2 at multiple settings ( e.g. different wavelengths) yield a slope that can be related to the analyte concentration in the sample. Similarly, transient signals could also be related to the analyte concentration exploiting a similar strategy. Thus, in this work, two multi-signal approaches developed in flow-based systems are proposed, based on the responses at multiple wavelengths (online multi-energy calibration, OMEC), and on the dispersion profile of the samples, herein denominated multi-dispersion calibration (MDC). The calibrations were carried out with sample solutions after 2-fold dilution with a standard solution and with water. The feasibility of OMEC and MDC were demonstrated using KMnO 4 solutions (without chemical reactions) under continuous and pulsed flow regimes. The applicability of this strategy was also demonstrated by the spectrophotometric determination of urea in milk and pet potty spray in a multi-pumping flow system, based on the color change of bromothymol blue after catalyzed hydrolysis by urease from jack beans ( Canavalia ensiformis ). MDC and OMEC were compared with external calibrations (EC) and classical standard addition. The limits of detection for urea were estimated at 13 mg L −1 , 16 mg L −1 , and 10 mg L −1 using MDC, MEC and EC, respectively. Recoveries from 93 to 101%, and the agreement of sample analyzes with the reference procedure demonstrated the good accuracy achieved by the proposed methods. Therefore, it was demonstrated the feasibility of MDC and OMEC for analytical purposes in a simple and efficient way with the advantages of flow-based manifolds.

Multivariate Calibration for the Determination of Copper,Zinc and Manganese Using Flow Injection Spctrophotometry

Simultaneous determination of iron, cobalt, nickel and copper by UV-visible spectrophotometry with multivariate calibration

Simultaneous Determination of Trace Manganese, Iron, Copper and Zinc Using Spectrophotometry Assisted by Artificial Neural Network Algorithm

Partial least squares method-spectrophotometric determination of trace manganese, iron, copper and zinc

A Study on the Use of Near-Infrared Spectroscopy for the Rapid Quantification of Major Compounds in Tanreqing Injection

Determination of Total Organic Carbon and Soluble Solids Contents in Tanreqing Injection Intermediates with NIR Spectroscopy and Chemometrics

Determination of Trace Amounts of Copper by Flow Injection Vapor Generation AAS

Simultaneous analysis of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) by spectrophotometry and the Kalman filter

Combination of Flow-Injection Techniques with Atomic Spectrometry in Agricultural and Environmental Analysis

Calibration of the Composition of Low-Alloy Steels by the Interval Partial Least Squares Using Low-Resolution Emission Spectra with Baseline Correction

Determination of manganese content in cottonseed meal using near-infrared spectrometry and multivariate calibration

Sequential determination of multi-nutrient elements in natural water samples with a reverse flow injection system

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water

Exploration for Experimental Condition of Simultaneous Determination of Fe Mn in Simulated- Gasolene

Compensation of Calibration Graph Curvature and Interference in Flow-Injection Spectrophotometry Using Gradient Ratio Calibration

Determination of copper in water and rice samples by flame atomic absorption spectrometry with flow-injection on-line adsorption preconcentration using a knotted reactor

Simple multi-signal calibrations exploiting flow analysis systems

Concentration calibration of multi-component analysis based on three-dimensional fluorescence spectroscopy

[Unusual case of traumatic lesion in the newborn, clinically simulating congenital abnormality of the esophagus].

Online Electrolytic Dissolution of Alloys and Multielement Determination by Inductively Coupled Plasma Atomic Emission-Spectrometry

Hybrid pumped gain-switched thulium fiber laser at a high repetition rate.