Abstract:The accurate prediction of axial capacity remains a challenging task for piles driven in sands. Rigorous database studies have become key tools for assessing the efficacy of design methods. This paper employs the 117 high-quality entries in the recently developed Zhejiang University – Imperial College London (ZJU–ICL) database to check for potential biases between nine prediction procedures, considering a range of factors. The analysis highlights the critical importance of addressing age after driving, open and closed ends, tension versus compression, and concrete compared to steel. It also shows the hierarchy of reliability parameters associated with the alternative approaches. The “full” Imperial College pile (ICP) approach and The University of Western Australia (UWA) approaches are found to have significant advantages in eliminating potential biases. It is also argued that design load and resistance or safety factors should be varied to match the design and site investigation methods applied, as well as the loading uncertainty and degree of load cycling, which often vary between applications. Noting that predictions for base capacities Qbare inherently less reliable than for shaft Qs, especially in rapidly varying ground profiles, credible lower bound parameters (cone resistance, qc) are recommended for Qbassessment. It is also recommended that the potential effects of cycling be addressed carefully in cases that involve substantial environmental loading.

DETERMINING STATIC RESISTANCE AT THE PILE TOE DURING DRIVING, WITH AN ANALYSIS OF PILE TOP ACCELERATION

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

Time domain analysis of vertical dynamic response of a pile considering the effect of pile-soil interaction

An Analytical Solution for Lateral Vibration of a Pile with Finite Length Pile in Viscoelastic Subgrade

Design Method Reliability Assessment from an Extended Database of Axial Load Tests on Piles Driven in Sand

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Determining Driving Resistance with Rebound of Pile-Top During Pile Driving

Multipoint Traveling Wave Decomposition Method and Its Application in Extended Pile Shaft Integrity Test

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Theoretical Study On Effect Of Pile Shaft Resistance On Rebound During Pile Driving

Study on pile drivability with a simplified method

Study on Pile Drivability with One Dimensional Wave Propagation Theory

A Destructive Field Study on the Behavior of Pile under Ten

A test on base bearing capacity of static drill rooted nodular pile

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Influence of Reaction Piles on Test Pile Response in A Static Load Test

A P-Y Curve Method for Horizontal Bearing Characteristics of Single Batter Pile in Sands

Lateral Dynamic Responses of Coastal Group Piles Considering Pile‒water‒soil Interactions

An Approach to Analyzing the Transverse Vibration of a Pile during Pile Driving