Abstract:Copper/steel composite is a kind of composite with excellent performance and broad application prospects. In this paper, the micro-morphology and structure of the interface of copper/steel composite prepared by the hot-dip casting were observed by scanning electron microscope and transmission electron microscope, and the formation mechanism of the interface area was explored. The results show that the hot-dip casting temperature has a great influence on the micro-structure and morphology of the copper/steel interface area. When the hot-dip casting temperature is lower than 1125 °C, the copper/steel interface area is basically in a straight line. Even if the hot-dip casting time is extended, the interface characteristics change little. At 1100 °C, the copper-rich phase precipitated at the interface area is the coherent precipitates of Cu and BCC-Fe, with the crystal orientation and the diameter about 10 nm ~ 30 nm. When the hot-dip casting temperature reaches 1150 °C, the copper/steel interface area begins to appear new micro-morphology, and the range of new micro-morphology becomes larger and larger with the increase in the hot-dip casting temperature and the extension of the hot-dip casting time. At 1200 °C, the copper-rich phase precipitated at the interface is the coherent precipitates of FCC-Cu and FCC-Fe, with the crystal orientation and the size similar to that at 1100 °C. In the process of the hot-dip casting, the formation of the copper/steel interface area experienced three stages: the co-temperature of copper/steel and the wetting of copper liquid on solid steel, the formation and transformation of the solid–liquid mixed layer between steel and copper liquid and the evolution stage of the liquid–solid mixed layer during cooling and solidification. This kind of interface zone with gradual structure tightly connects the steel matrix and solidified copper together, to form a copper/steel composite with strong bonding.

A Comparative Study of Interface Characteristics and Properties of Bronze Coatings on Steel by Plasma Arc and Cold Metal Transition Deposition

Study on interface behavior of Be/CuCrZr alloy by diffusion bonding

A comparative study on microstructure and mechanical properties of wire-arc directed energy deposited Al–Zn–Mg–Cu alloy based on the cold metal transfer technology

Interfacial characteristics and mechanical properties of 316L and S214 bimetals fabricated by wire‐arc additive manufacturing

Tin-bronze Cladding on Thin Steel Sheet by Cold Metal Transfer Arc Deposition

Cold-sprayed Cu Matrix Composite Coatings with Core-Shell Structured Co@WC Reinforcements on Q235 Steel

Microstructure, Microhardness and Tribological Properties of Bronze-Steel Bimetallic Composite Produced by Vacuum Diffusion Welding

Microstructure and Mechanical Properties of Nickel-Aluminum Bronze Coating on 17-4PH Stainless Steel by Laser Cladding

The Preparation and Properties of Thick Bronze Coating Using Friction-Assisted Jet Electrodeposition

Comparative study of the efficiency of inhibitors and coatings for bronze artifacts

Heterogeneous interfaces of aluminum bronze/Inconel 718 dissimilar alloys under different wire arc directed energy deposition sequences

Comparative study on microstructure and oxidation resistance of Inconel 625 superalloy coatings on 12CrMoV steel surfaces prepared by CMT and MIG cladding

Microstructure and properties of pure iron/copper composite cladding layers on carbon steel

Effect of current on microstructures and properties of tin bronze/steel bimetallic sheets fabricated by arc deposited technique

Effect of Fe content on the friction and abrasion properties of copper base overlay on steel substrate by TIG welding

Comparative study on the properties and microscopic mechanism of Ti coating and W coating diamond-copper composites

Microstructure and properties of mixed Cu–Sn and Fe-based alloys without or with molybdenum addition processed by plasma transferred arc

A comparative investigation on wear behaviors of physical and chemical vapor deposited bronze coatings for hydraulic piston pump

Interface area morphology and formation mechanism of copper/steel composite prepared by the hot-dip casting

Interfacial characteristics and mechanical properties of additive manufacturing martensite stainless steel on the Cu-Cr alloy substrate by directed energy deposition

Interface characteristics and mechanical properties of wire-arc depositing Inconel 625 superalloy on ductile cast iron