Effect of P2O5 on Nucleation, Crystallization and Mechanical Properties of Y2O3–Al2O3–SiO2 Glasses

Weihong Zheng,Hao Zhang,Qidong Wang,Jian Yuan,Peijing Tian
DOI: https://doi.org/10.1016/j.ceramint.2024.01.259
IF: 5.532
2024-01-01
Ceramics International
Abstract:Transparent Y2O3–Al2O3–SiO2 (YAS) glass-ceramics were prepared by the melting-quenching method and two-step heat treatment. P2O5 is one of the most widely used oxide nucleating agents in the production of glass-ceramics, which can control the crystallization temperature or the grain size. The effects of different amounts of P2O5 on the nucleation, crystallization, structure, and mechanical properties of YAS glasses were studied. Raman spectra fitting showed that with increasing P2O5 content from 0.50 wt% to 4.00 wt%, the content of structure units Q3 and Q4 gradually increased, indicating that P2O5 mainly acted as a network former in YAS glass to enhance the connectivity of silicate glass structure. The results revealed that the increase in P2O5 content led to fewer nucleation sites and lower crystallinity. As the P2O5 content increased, the transmittance of YAS glass-ceramics changed slightly under the same heat treatment, but the Vickers hardness decreased significantly. Fine, granular and evenly distributed nanocrystals were precipitated from YAS precursor glasses through heat treatment at 700 °C for 10 h and 750 °C for 1 h. Additionally, the reported Vickers hardness, fracture toughness and transmittance of YAS glass-ceramic containing 0.50 wt% P2O5 were 674.48 Hv, 1.09 MPa m1/2 and 87.59 %, respectively.
What problem does this paper attempt to address?