Studies on Corrosion Inhibitors of Aluminium in Brine

Wei Yu

2005-01-01

Abstract:The corrosion inhibitors of aluminium were synthesized by calcium gluconate,phosphate ester,additive etc and the corrosion inhibition efficacy were studied using the weight loss method.The corrosion inhibition rate is up to 95% in brine medium.

What problem does this paper attempt to address?

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

G. A. Rassoul,Dhia El-Din M. Kassim,Baseem H. EsSebbagh

DOI: https://doi.org/10.31699/ijcpe.2007.3.10

2007-09-30

Iraqi Journal of Chemical and Petroleum Engineering

Abstract:The present study was conducted to evaluate the effect of different inhibitors on the corrosion rate of aluminum in 50% (v/v) ethylene glycol solution at 80°C and pH 8.0 in which the electrochemical technique of linear sweep voltammetry was employed to characterize each inhibitor function and to calculate the corrosion rate from Tafel plots generated by a computer assisted potentiostat. It is found that both sodium dichromate and borax reduces the corrosion rate by polarizing the anodic polarization curve while sodium phosphate, potassium phosphate, and sodium benzoate reduces the corrosion rate by polarizing both the anodic and cathodic polarization curve. When inhibitor concentration increases from I g/l up to 3 g/l, the inhibitor efficiency increases from 50% up to 85% for borax, from 64% up to 71% for sodium dichromate, and from 66% up to 82% for sodium phosphate, while constant inhibitor efficiency of about 55% and 50%for potassium phosphate and sodium benzoate were obtained respectively.
ELECTROCHEMICAL STUDY OF INHIBITIOR ON ALUMINIUM ALLOY IN HIGH CONCENTRATION CHLORIDE SOLUTIONS

ZHANG Sheng-tao,ZHU Ye,WANG Yan-bo,HOU Bao-rong

DOI: https://doi.org/10.3969/j.issn.1005-748x.2006.10.006

2006-01-01

Abstract:Effects of inhibitor concentration and temperature on corrosion of Y112 aluminium alloy in high concentration chloride solutions were studied with electrochemical methods.The inhibition effectivity was changed with the inhibitor concentration.The corrosion potential and rate were related to inhibitor concentration.The corrosion rate increased and inhibition effectivity decreased with temperature rise.
Study on Performance of Several Corrosion Inhibitors for Aluminum in Hydrochloric Picking Solution

XING Na,JIAO Qing-zhu,ZHANG An-feng,LI Jie-lan,ZOU Ai-mei

DOI: https://doi.org/10.3969/j.issn.1007-9831.2005.01.009

2005-01-01

Abstract:Inhibiting property of several corrosion inhibitors for Aluminum in hydrochloric acid was studied by weight-loss and their inhibiting mechanism was discussed.Results showed that inhibiting efficiency was in order: SH-904lan-826lan-5.The optimum concentrations of SH-904 and lan-826 were all 1‰.The optimum concentration of lan-5 was 0.25‰.
Study on anticorrosion properties of inhibitors in microemulsion cutting fluid to the aluminium alloy

ZHANG Jun,MENG Yao

DOI: https://doi.org/10.13662/j.cnki.qjs.2011.04.009

2011-01-01

Abstract:The anticorrosion properties of seven different kinds of water-solubility inhibitors to the aluminum alloy,such as organic heterocyclic compound,fatty acid,amine borate and phosphoric compound inhibitors were assessed with the liquid immersion corrosive test method.The metal surface morphology and distribution of elements were observed by the Scanning Electron Microscope(SEM) and the Energy Dispersive Spectrometer(EDS).BTA and the fatty acids inhibitors were not anticorrosion properties in microemulsion cutting fluid;When concentration of NACAP was increasing,it had stated anticorrosion properties to the aluminum alloy.But the amine borate has no anticorrosion properties,furthermore it was happened aggravating corrosion if concentration of the amine borate was increasing.And the phosphoric compound inhibitors possed of well anticorrosion properties.The corrosion preventing effect of phosphonate ester was the most prominent.It is an excellent corrosion inhibitor for aluminum alloy.
Study of Inhibition of Na2MoO4, NaNO2 and BTA on Aluminium Alloy in High Concentration Chloride Solutions with AFM

ZHANG Sheng-tao,WANG Yan-bo,HOU Bao-rong

DOI: https://doi.org/10.3969/j.issn.1008-7818.2006.01.007

2006-01-01

Abstract:The corrosion behavior of aluminium alloy in high concentration chloride solution has been studied with AFM. Theresults indicate that Na2MoO4 (0.20%) added into 25% CaCl2 solution can acquire better anti-corrosion effect than without inhibitor,and the add of BTA inhibitor (0.20%) may decrease the ability of anti-corrosion in 25% CaCl2 solution with 0.20% Na2MoO4. AlthoughNaNO2 can form good oxide film on aluminium alloy, the effect of anti-corrosion of 0.15% NaNO2 and 0.20%BTA is worse than 0.20%Na2MoO4 and 0.20% BTA.
Experimental and Quantum Chemical Studies of Carboxylates As Corrosion Inhibitors for AM50 Alloy in Ph Neutral NaCl Solution

Junjie Yang,Pingli Jiang,Youmin Qiu,Chih-Yu Jao,Carsten Blawert,Sviatlana Lamaka,Anissa Bouali,Xiaopeng Lu,Mikhail L. Zheludkevich,Wei Li

DOI: https://doi.org/10.1016/j.jma.2021.05.021

IF: 11.813

2022-01-01

Journal of Magnesium and Alloys

Abstract:Sodium salts of mono-and di-carboxylic acids（glycolic, fumaric and benzoic acid） were studied as corrosion inhibitors for AM50 alloy in pH neutral aqueous NaCl environment. Hydrogen evolution, electrochemical and surface characterization techniques were employed to reveal their corrosion inhibition mechanism, whilst the molecular features of inhibitors were investigated by quantum chemical calculation. All inhibitors reduced anodic dissolution of AM50 and their efficiency generally increased with time and concentration from 5 mM to 100 m M.The inhibition mechanism can be described as physisorption of inhibitive molecules on the surface of the intrinsic oxide layer followed by chemisorption with Mg 2+ and Al 3+ , and the difference in inhibition action among these inhibitors was explained on the molecular scale.
Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Krishna Prajapati,P. S. Desai,R. T. Vashi,Bhumika B. Parmar

DOI: https://doi.org/10.1007/s11696-024-03651-8

IF: 2.146

2024-08-19

Chemical Papers

Abstract:The assessment of two diamine derivatives, TMD and IPDA, as corrosion inhibitors for aluminium in hydrochloric acid (HCl) at concentrations of 0.2 M, 0.3 M, and 0.4 M. (4S)—2,2,4-trimethyl hexane-1,6-diamine (TMD) and (1R,3R)-3-(amino methyl)-3,5,5-trimethyl cyclohexane-1-amine (IPDA) are verified for their ability to inhibit corrosion of Al in acidic conditions. The evaluation is conducted using electrochemical impedance spectroscopy (EIS), potentiodynamics polarization (PDP), and gravimetric methods. The inhibitors' effectiveness depends on their concentration (ranging from 20 to 50 mM) and molecular structure. Because TMD has more anchoring functional groups, it had the best inhibitory efficacy, reaching a maximum of 98.3% at 50 mM concentration. It is looked into how temperature (313–333 K) affects corrosion behaviour. As per Langmuir's adsorption isotherm, the temperature probably influences the ability of inhibitors to adsorb on the surface of aluminium, pointing to a monolayer adsorption mechanism. Calculated and described are the thermodynamics activation factors for the dissolution process of Al in both inhibited along uninhibited solutions. The stability of the inhibitor-Al contact and the reaction kinetics are revealed by these characteristics. The creation of a protective covering on the Al surfaces was validated by surface investigation techniques such as atomic force microscopy, scanning electron microscopy, and energy-dispersive X-ray (EDX) analysis, demonstrating the inhibitors' efficacy in preventing corrosion. The inhibitors' molecular chemical makeup as well as the degree of inhibitory efficacy is correlated in theoretical investigations employing molecular dynamics simulations and density functional theory. Theoretical calculations shed additional light on the adsorption mechanism.

chemistry, multidisciplinary
Study of the Effect of Environmental and Friendly Corrosion Inhibitors on Magnesium Alloy

ZHANG Peng,LI Qing,CHEN Fu-nan

DOI: https://doi.org/10.3969/j.issn.1001-9731.2013.16.021

2013-01-01

Journal of Functional Biomaterials

Abstract:Magnesium alloy was one of the most commonly used light metal material,and adding corrosion inhibitors to corrosion medium was an effective method to improve the corrosion resistance of magnesium alloy.In the view of environment protection,we study the corrosion inhibition of four inhibitors for AZ91D magnesium alloy in 3.5wt% NaCl by electrochemical polarization,impedance technology.According to the properties of the four inhibitors,strengthen the adsorption of the four inhibitors was achieved through adding pefloxacin mesylate.Finally,these environmental friendly corrosion inhibitors have a certain degree inhibition effect,and joining pefloxacin mesylate can further enhance the inhibition effect to AZ91D magnesium alloy in 3.5wt% NaCl.
Study of corrosion inhibitors on AZ91D magnesium alloy

LI Yan,LU Xiaopeng,Tao ZHANG,Fuhui WANG

2018-01-01

Abstract:The field of Mg corrosion inhibitors develops rapidly. However, efficient and environmentally friendly corrosion inhibitors for Mg alloys are still scarce. In the meanwhile, inhibiting mechanism of the corrosion inhibitors is not fully understood. Various kinds of organic and inorganic corrosion inhibitors have been selected to investigate their inhibiting efficiency on AZ91D Mg alloy in 3.5 wt. % NaCl solution. Hydrogen evolution measurement, potentiodynamic polarization and electrochemical impedance spectroscopy were employed to evaluate the effect of corrosion inhibitors on the corrosion performance of Mg alloy. Some new eco-friendly inhibitors were found to demonstrate high inhibiting efficiency for AZ91D Mg alloy. The effect of inhibitor concentration as well as temperature of the NaCl solution on the corrosion performance of Mg alloy was studied to disclose the inhibiting mechanism by using scanning electron microscopy (SEM).
Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Lipiar K M O Goni,Shaikh A Ali,Hasan A Al-Muallem,Mohammad A Jafar Mazumder

DOI: https://doi.org/10.1016/j.heliyon.2024.e38425

IF: 3.776

2024-09-26

Heliyon

Abstract:The corrosion phenomenon and its economic impacts can hardly be ignored in any application. This study synthesized a quaternary ammonium salt (3) containing hydrophobic dodecyl and electron-rich diallylbenzyl amine moieties to be used in 15 % HCl as a corrosion inhibitor of mild steel. Several techniques, such as 1H and 13C NMR, IR, TGA, and elemental analysis, have been used to characterize inhibitor 3. Popular corrosion measurement techniques, namely weight loss, potentiodynamic polarization techniques, and electrochemical impedance spectroscopy, have been used to determine the efficiency of inhibitor 3. At 303 K and a moderately low concentration of 50 ppm, the quaternary ammonium salt-based inhibitor demonstrated a maximum efficiency of ≈95.0 %. At elevated temperatures of 313, 323, and 333 K, the inhibition efficacy values were recorded as 91.3, 82.8, and 75.0 %, respectively. Adsorption isotherm study revealed that the adsorption of inhibitor 3 followed Langmuir adsorption isotherm. The value of Δ G a d s ° was found to be - 40.19 kJ mol-1, indicating that inhibitor 3 became adsorbed via a mixed physi-chemisorption mechanism. A very high adsorption constant ( K a d s ) of 1.53 × 105 L mol-1 suggested strong adsorption of inhibitor 3. The difference in activation energy ( E a ) value of 42.4 kJ mol-1 between the control and the inhibited solution indicated an efficient adsorption of inhibitor 3. The ability of inhibitor 3 to retard both anodic and cathodic half-cell reactions was proved via open circuit potential and Tafel curves studies. Detailed discussions on the change in corrosion current densities ( i c o r r ), polarization ( R p ) and charge transfer ( R c t ) resistances have been offered to discuss the inhibition efficiency. Water contact angle measurement showed a drastic increase in mild steel surface hydrophobicity following inhibitor 3 adsorption. SEM-EDX and XPS studies confirmed the definitive presence of inhibitor 3 on the mild steel surface. Density functional theory (DFT) studies revealed the frontier molecular orbitals with which the metal surface interacts. A detailed corrosion inhibition mechanism has been offered in the context of adsorption isotherm and DFT studies.
Theoretical Study of N-thiazolyl-2-cyanoacetamide Derivatives As Corrosion Inhibitor for Aluminum in Alkaline Environments

X. Y. Zhang,Q. X. Kang,Y. Wang

DOI: https://doi.org/10.1016/j.comptc.2018.03.026

IF: 2.292

2018-01-01

Computational and Theoretical Chemistry

Abstract:A series of systematic theoretical studies on the use of N-Thiazolyl-2-cyanoacetamide derivatives as corrosion inhibitors of aluminum in alkaline environment was carried out by using density functional theory (DFT), molecular dynamics (MD) simulation and Monte-Carlo (MC) simulation. The growth characteristics of Al were obtained and discussed. Results show that the (1 1 1) face of Al is suitable as a substrate for adsorption due to its large number of adsorption sites and low surface energy. Quantum chemical calculation shows that the reactive regions of the three derivatives are located on the benzene ring and the thiazole ring. The difference in E-LUMO determines the different performances between corrosion inhibitions, whereas solvation effects mainly change the dipole moment of three inhibitors. MC simulation shows that solvation effects can change the molecular configuration of the corrosion inhibitor, there affecting the corrosion inhibition efficiency. MD simulation shows that the free volume and the self-diffusion of the film are the two key factors that affect the inhibition of the corrosion particle diffusion by the corrosion inhibitor film. The results were in good agreement with reported experiment results. This study can help understand the mechanism of similar inhibitors and develop more inhibitors for Al in alkaline environment. (C) 2018 Elsevier B.V. All rights reserved.
Corrosion Inhibition of Aluminium Anode by Cecl3 in Simulated Seawater

Yuhong Zhou,Xinghua Guo,Xijiang Han

DOI: https://doi.org/10.4028/www.scientific.net/amr.281.11

2011-01-01

Advanced Materials Research

Abstract:Corrosion of aluminium anode in the seawater will reduce the life of the aluminum-air cell. It has been recognized that addition of inhibitor into the seawater electrolyte is an effective method that may prevent the corrosion of aluminium anode.The corrosion inhibition behavior of aluminium anode after addition of CeCl3 with different concentrations in simulated seawater has been investigated in this paper. EIS results showed that there was a significant increase of corrosion resistance when the concentration of CeCl3 reached 500mg·L-1 in simulated seawater, compared to the case without inhibitor. Potentiodynamic polarization curves showed that CeCl3 was a cathodic inhibitor in simulated seawater. SEM and XPS confirmed that the cerium oxide/hydroxide were formed at micro-cathodic areas of aluminum surface,which decreased the corrosion rate of aluminium anode.
Effect of Sodium Carbonate on Corrosion Inhilition of Auminum Alloy in NaCl Solution

王成,江峰,余刚,丁晖,林海潮

DOI: https://doi.org/10.3969/j.issn.1001-1560.2000.08.001

2000-01-01

Abstract:The effect of sodium carbonate on the corrosion inhibition of aluminum alloy in sodium chloride solution was investigated by SEM and electrochemical means. It was shown that Na2CO3 inhibited the pitting corrosion of aluminum alloy to some extent. This was achieved by the formation of a conversion film on the alumium alloy surface and by the inhibition of cathodic process.
Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution

Wenyue Zhang,Daquan Zhang,Xiaohui Li,Chunping Li,Lixin Gao

DOI: https://doi.org/10.1016/j.corsci.2022.110556

IF: 7.72

2022-10-01

Corrosion Science

Abstract:Dodecyl dimethyl betaine (BS-12) and calcium gluconate (CaGlu) are examined as hybrid corrosion inhibitors for AA5052 aluminum alloy in 4 M NaOH electrolyte. The corrosion inhibition is investigated by hydrogen evolution tests, electrochemical measurements, surface analysis, and theoretical calculation. It demonstrates that the hybrid inhibitors can protect aluminum alloy effectively. CaGlu has a good coordination effect with aluminum ions. The hydrophilic group of BS-12 can occupy the active sites on the aluminum alloy/solution interface. The hydrophobic alkyl chain can further enhance the corrosion inhibition effect. The maximum corrosion inhibition efficiency reaches 86.3% at 1 mM BS-12 + 3 mM CaGlu.

materials science, multidisciplinary,metallurgy & metallurgical engineering
The Corrosion Inhibition Effect on Fatigue Behavior for Aluminum Alloy 5052 in the Saline Environment

Khalid Eldwaib,Mustafa Aldarwish,Mohamed Ballem,Salem Garrab,Salahadin Adrwish

DOI: https://doi.org/10.51984/jopas.v21i2.2002

2022-08-22

Journal of Pure & Applied Sciences

Abstract:The corrosion inhibition of Al alloys is the subject of huge technological importance wing to the use of these alloys in wide industrial applications. Fatigue life (number of cycles to failure Nf) for Al-Mg alloy in 3.5% NaCl at different acidity and alkalinity and 3.5% NaCl (pH=1) with inhibitors was investigated in this study. The inhibitors were composed mainly of phosphate, adding a certain proportion of other nontoxic inhibitors to select alternatives to environmentally hazardous chromate. Fatigue behavior was studied by using the corrosion fatigue machine with plane-bending mode. The large difference between the fatigue life in the corrosive mediums, such as NaCl, and that in dry air is noticed. The results showed that in 3.5% NaCl without inhibitor, the minimum fatigue life is obtained at pH=1, where the media is too aggressive (extremely acidic), whereas the highest value is obtained at pH=5 where the very low solubility of oxide film on the alloy. As the concentration of inhibitor increased the number of cycles was increased as well. The scanning electron microscope (SEM) had conducted on the surface morphology and fracture section of the specimens for characterizing.
Corrosion Inhibition of Sodium Alginate on AZ31 Magnesium Alloy in Simulated Automotive Coolant

饶楚仪,张大全,金星,高立新,郭兴伍

2011-01-01

Abstract:The inhibition of sodium alginate on AZ31 magnesium alloy corrosion in simulated automotive coolant was investigated by electrochemical impedance spectroscopy （EIS） and polarization curves measurement. Results show that sodium alginate of 0. 005 g/L had good inhibitive effect on the corrosion of AZ31 magnesium alloy. Sodium alginate is a cathodic type corrosion inhibitor and retards the hydrogen evolution of AZ31magnesium alloy.
Experimental and Theoretical Study on Cyanuric Chloride Derivatives As Corrosion Inhibitors for Oxyen Corrosion of Mild Steel in High Salinity Corrosive Medium

Jincheng Mao,Difei Han,Jinzhou Zhao,Xiaojiang Yang,Chong Lin,Heng Zhang

DOI: https://doi.org/10.37358/rc.21.2.8425

2021-01-01

Revista de Chimie

Abstract:Designed and synthesized two corrosion inhibitors that can resist corrosion of low-carbon steel in high-salinity corrosive media. When these compounds are used as corrosion inhibitors in high salinity corrosive media, the laboratory evaluation results clearly showed that the two corrosion inhibitors had an excellent corrosion resistance. The synthetic corrosion inhibitors have an symmetrical structure which not only has a symmetrical appearance but also has the practical significance of forming an entire surface covering layer, which avoids the general corrosion and pitting corrosion.
Corrosion Inhibition of Magnesium Alloy in NaCl Solution by Ionic Liquid: Synthesis, Electrochemical and Theoretical Studies

Huishuang Su,Yue Liu,Xing Gao,Yafeng Qian,Weijie Li,Tiegang Ren,Li Wang,Jinglai Zhang

DOI: https://doi.org/10.1016/j.jallcom.2019.03.318

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:A new ionic liquid, benzyl triphenyl phosphonium bis(trifluoromethylsulfonyl)amide ([BPP][NTf2]), for magnesium alloy is synthesized. The potential of [BPP][NTf2] to be inhibitor is firstly estimated as compared with [P-6,P-6,P-6,P-14][NTf2] by theoretical calculations. Then, the inhibition of AZ31B Mg alloy in 0.05 wt% NaCl solution is evaluated by [BPP][NTf2] is investigated by Tafel linear polarization method, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The most optimum inhibitor efficiency of [BPP][NTf2] is 91.4% at room temperature. The adsorption of [BPP][NTf2] on the surface of AZ31B Mg alloy obeys Langmuir isotherm with predominantly chemical adsorption. The corresponding result is further analyzed by the theory. The corrosive product is detected by Fourier transform infrared spectrum (FTIR). The possible inhibition mechanism is proposed, in which the effect of cation on inhibition is proposed in addition to the influence of anion. (C) 2019 Elsevier B.V. All rights reserved.
A Study on Corrosion Inhibitor for Magnesium Alloy

Xu Yang,Fu Sheng Pan,Ding Fei Zhang

DOI: https://doi.org/10.4028/www.scientific.net/MSF.610-613.920

2009-01-01

Materials Science Forum

Abstract:With the aim of evaluating corrosion inhibition for various inhibitors, a new qualitative method for corrosion inhibition effect test for magnesium and magnesium alloys was developed. The change of polarization current density of AZ61 magnesium alloy in electrochemical polarization experiments in alkali aqueous Solution with 5mmol/L sodium dodecylsulphate(SDS), phytic acid(PA), ethylenediamine tetraacetic acid(EDTA), p-nitro-benzene-azo-resorcinol(PNBAR), acidum tannicum(AT) or stearic acid(SA) were tested. The SEM-EDS techniques and deposition experiment method were used for further confirmation of the corrosion inhibition. The results showed that those organic compounds which could form the inhibitor-magnesium precipitation in aqueous solution could be used as corrosion inhibitors for magnesium alloys to inhibit the increase of polarization current density as well as the dissolution and oxidation of magnesium alloys effectively.
Corrosion Inhibiton Mechanism of Cerium(III) for Aluminum Alloy

GU Bao-ke,Jianhua Liu,Xiao-Chun Ji

2009-01-01

Abstract:By using a split cell to separate anode and cathode as well as measuring the change of net-electric current between the two electrodes caused by the change of the amount of oxygen in the solution and the addition of CeCl_3.The influence of CeCl_3 on corrosion behavior of B95 super-strength aluminum alloy in the 0.1 mol/L NaCl solution was studied.Meanwhile,a further discussion about Ce salt inhibition mechanism was carried out by revealing the features of electrode surface with the help of SEM and X-ray energy-dispersive spectrometry(EDS) and resorting to other electric chemical techniques,such as potential-time curve,polarization curve and so on.The results showed that a layer of uneven conversion coatings could appear on the surface of B95 alloy after being dealt with by Ce salt;the dynamics of coating-formation involved two stages:the solution of aluminum alloys and coating-formation afterwards;the cerium conversion coatings were mainly composed of Ce,O and Al elements;the experiment with completely submerging into the solution of 3.5% NaCl showed that the corrosion rate of B95 could be reduced by several hundred times and the anti-corrosion performance of aluminum alloys improved greatly when CeCl_3 were added to the solution.As a result CeCl_3 proves to be an excellent coating-formation material and aluminum alloy corrosion inhibitor.

Studies on Corrosion Inhibitors of Aluminium in Brine

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

ELECTROCHEMICAL STUDY OF INHIBITIOR ON ALUMINIUM ALLOY IN HIGH CONCENTRATION CHLORIDE SOLUTIONS

Study on Performance of Several Corrosion Inhibitors for Aluminum in Hydrochloric Picking Solution

Study on anticorrosion properties of inhibitors in microemulsion cutting fluid to the aluminium alloy

Study of Inhibition of Na2MoO4, NaNO2 and BTA on Aluminium Alloy in High Concentration Chloride Solutions with AFM

Experimental and Quantum Chemical Studies of Carboxylates As Corrosion Inhibitors for AM50 Alloy in Ph Neutral NaCl Solution

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Study of the Effect of Environmental and Friendly Corrosion Inhibitors on Magnesium Alloy

Study of corrosion inhibitors on AZ91D magnesium alloy

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Theoretical Study of N-thiazolyl-2-cyanoacetamide Derivatives As Corrosion Inhibitor for Aluminum in Alkaline Environments

Corrosion Inhibition of Aluminium Anode by Cecl3 in Simulated Seawater

Effect of Sodium Carbonate on Corrosion Inhilition of Auminum Alloy in NaCl Solution

Excellent performance of dodecyl dimethyl betaine and calcium gluconate as hybrid corrosion inhibitors for Al alloy in alkaline solution

The Corrosion Inhibition Effect on Fatigue Behavior for Aluminum Alloy 5052 in the Saline Environment

Corrosion Inhibition of Sodium Alginate on AZ31 Magnesium Alloy in Simulated Automotive Coolant

Experimental and Theoretical Study on Cyanuric Chloride Derivatives As Corrosion Inhibitors for Oxyen Corrosion of Mild Steel in High Salinity Corrosive Medium

Corrosion Inhibition of Magnesium Alloy in NaCl Solution by Ionic Liquid: Synthesis, Electrochemical and Theoretical Studies

A Study on Corrosion Inhibitor for Magnesium Alloy

Corrosion Inhibiton Mechanism of Cerium(III) for Aluminum Alloy