Abstract:Low-cost thermal insulation porous ceramics with uniform pore diameter and low bulk density were prepared with soda-ash dregs and felsic tailings. We investigated the effect of temperature, foaming agent, fluxing agent, Al 2 O 3 and CaO content on the pore structure and crystal phase of porous ceramics. The effect of Ca 2+ in soda-ash dregs on the preparation of quartz-feldspar based porous ceramics was studied. The results showed that the contribution of Ca 2+ to the preparation of porous ceramics in this system was mainly to accelerate the Si-O bond fracture and reduce the sintering temperature at the initial stage of sintering, which destroyed the needle-like feldspar in the high temperature melt and reduced the melt viscosity, thus reduced the foaming resistance and promoted the porous products with uniform pore size distribution. The Ca 2+ content on the high side can participate in the formation of crystals in sintering. The generated needle-like diopside and augite, which have small length-diameter ratio, will negligibly change in the viscosity of melt at high temperatures, and their inhibition effect on pores is not as good as that of feldspar with large length-diameter ratio, resulting in the merger and collapse of pores. But the increase of diopside and augite can improve the compressive strength of porous products to some extent. Porous ceramic products containing needle-like feldspar phase can be prepared by using two kinds of solid waste, which can improve the compressive strength of the products and reduce the raw material cost and energy consumption while comprehensively utilizing the double solid waste. The optimal product has a bulk density of 0.45 g/cm 3 , a compressive strength of 3.17 MPa, and a thermal conductivity of 0.11 W/(m·K).

Research on Low-temperature and Lead-free Fritted Glaze Formula

Controllable Competitive Nanocrystallization of La3+-based Fluorides in Aluminosilicate Glasses and Optical Spectroscopy

Study on Environment-Fridenly Leadless Flux for Overglaze Colorswith Low Bismuth Content

Transparent glaze containing high-alumina glass frit: Batch-to-melt conversion

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Research on the Preparation of Envionment-Protecting Leadless Fluxing Agent for Overglaze Colors with Low Bismuth

Low-melting non-frit glazes for construction and artistic ceramics

RESEARCH ON THE EFFECT OF ALKALINE METAL OXIDES AND FLUORIDES ON THE PERFORMANCES OF GREEN LEADLESS FLUX FOR OVERGLAZE COLORS

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Structure and thermal properties of the fritted glazes in SiO2–Al2O3–CaO–MgO–Na2O–K2O–ZnO system

Development of Leadless Flux for Overglaze Color by Alkaline Earth Composite Instead of Lead Oxide

RESEARCH ON THE EFFECT OF STABILIZING AGENTS ON THE PERFORMANCES OF GREEN LEADLESS AND CADMIUMLESS FLUXING AGENTS FOR OVERGLAZE COLORS

Effect of Al2O3 on Crystallization, Microstructure, and Properties of Glass Ceramics Based on Lead Fuming Furnace-Slag

Effects of Glass Frits on the Properties of Luminescent Ceramics

Synthesis and Coloring Mechanism of Metallic Glaze in R2O-RO-Al2O3-SiO2-P2O5 System

Effects of Fluxes and Coloring Aids on the Performances of Leadless and Cadmiumless Fluxing Agents for Overglaze Colors

Preparation of transparent glaze enhanced by mullite crystals with branched architecture

AN APPROACH TO THE PROCESSING OF MnO-PbO-ZnO SYSTEM LUSTER GLAZE

Effects of Additives on the Thermal Properties of Low Melting Point Lead Borosilicate Glasses

Preparation of Thermal Insulation Ceramics Using Felsic Tailings as Main Raw Material and Soda-ash Dregs as Flux

Investigation of the P2O5–Bi2O3–CaO system: Glass forming region, structure, properties