Abstract:A gradient nanostructured layer is generated on the surface of Cu–Al alloy and the strengthening mechanism is mainly characterized by dislocation movement and mechanical twinning. The microhardness of the nanostructured surface layer is increased by 2.4 times. The samples after shot peening have excellent mechanical performances, corrosion resistance, and tribological properties. Cu–Al alloy with a gradient nanostructured surface layer is prepared by ultrasonic shot peening (USP). The effect of different shot peening times on the microstructure and properties of the modified layer is systematically investigated. The results show that the surface phase structure is not changed by USP technology, but a gradient nanocrystalline layer is formed on the surface, and the surface grains are obviously refined. The nanocrystalline mechanism is characterized by dislocation movement and mechanical twinning. USP can greatly improve the mechanical properties, tribological properties, and corrosion properties of the alloy. When the shot peening time is 15 min, the modification effect is the best. The hardness is as high as 254.1 HV0.2, which is 2.4 times that of the matrix, and the average coefficient of friction is only 0.231. The volume wear amount and volume wear rate are 4.434 × 107 μm3 and 0.1848 μm2 N−1, respectively. The strengthening mechanism of nanosized samples is grain refinement and work hardening, and the wear mechanism is abrasive wear and slight oxidation wear. The improvement of the corrosion performance of nanosized samples is mainly due to the formation of the dense passivation film on the surface.

Characteristic and Properties of Nanocrystalline Surface Layer in Cu-10wt%Ni Alloy Induced by Surface Mechanical Attrition Treatment

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Surface hardening of NiTi shape memory alloy induced by the nanostructured layer after surface mechanical attrition treatment.

Surface Nanocrystallization of Mg-3 Wt.% Li-6 Wt.% Al Alloy by Surface Mechanical Attrition Treatment

Wear resistance of NiTi alloy after surface mechanical attrition treatment

Microstructure and Thermal Stability of Bulk Nanocrystalline Alloys Produced by Surface Mechanical Attrition Treatment

Microstructural Evolution in NiTi Alloy Subjected to Surface Mechanical Attrition Treatment and Mechanism

Microstructural evolution of AZ31 Mg alloy with surface mechanical attrition treatment: Grain and texture gradient

Surface Mechanical Attrition Treatment Induced Phase Transformation Behavior in NiTi Shape Memory Alloy

Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process

A Coupled EBSD/TEM Analysis of the Microstructure Evolution of a Gradient Nanostructured Ferritic/Martensitic Steel Subjected to Surface Mechanical Attrition Treatment

Preparation of Gradient Nanostructured Cu–Al Alloy Matrix and Evolution Microstructure and Properties

Corrosion Behavior on Orthopedic NiTi Alloy with Nanocrystalline/amorphous Surface

Grain refinement at the nanoscale via mechanical twinning and dislocation interaction in a nickel-based alloy

Effect of Surface Mechanical Attrition Treatment on Biodegradable Mg-1Ca Alloy.

Effect of Ultrasonic Nanocrytalline Surface Modification on Hardness and Microstructural Evolution of Cu-Sn Alloy

Study of Surface Modification of NiCrBSi Coating by Electron Beam Cladding on Inconel 625 Alloy

Characterization of the Nano-Scale Surface Layer of a Tempered Martensitic Steel Synthesized by Ultrasonic Nanocrystalline Surface Modification Treatment

Enhanced Tensile Ductility in an Electrodeposited Nanocrystalline Ni

Surface Performance of Nano-CrN/TiN Multi-Layered Coating on the Surface of Ti Alloy

Effect of surface mechanical attrition treatment on the microstructure of cobalt–chromium–molybdenum biomedical alloy