Abstract:Pitting corrosion is commonly induced in aging ships and marine structures accompanied by fatigue cracks which may be propagated under cyclic loads. The occurrence of these damages contributes to the performance deterioration of ship structures. From the perspective of safety design, it is of great engineering significance to address the residual ultimate strength of the hull plate with coupled damage of pitting corrosion and crack. In this paper, a compression test was conducted for the hull plate to measure the impact of coupled damage on the ultimate strength. An adaptive fixture is carefully designed which can simulate the boundary conditions of plates supported by real stiffeners. Additionally, the mechanical properties of AH36 steel material are determined using a tensile test. Afterward, the ultimate strength results obtained experimentally are used to verify the reliability of those achieved via nonlinear finite element analysis. Based on the basic behavior under monotonic load, a parametric study is undertaken numerically for the hull plate under cyclic load accounting for the influences of accumulative plastic damage, pitting corrosion and crack. Some interesting findings concerning the structural behavior are presented. It is found that the strength degenerates as the corrosion and crack become more serious or the cycle number increases. The influence mechanism of the plastic damage due to the cyclic load is consistent for the plates with different degrees of corrosion and crack. On the basis of 650 datasets by numerical analysis, an accurate empirical formula is proposed for predicting the residual strength of hull plate with coupled damage under cyclic load by using artificial neural networks.

A Study of Ultimate Strength for Container Ship Bottom Structures under Bi-axial Loads Considering Corrosion Effects

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Study on Ultra‐low Cycle Fatigue Fracture of Thick‐walled Steel Bridge Piers

The influence of lateral pressure on ultimate strength of ship structure

Effect of Corrosion-Induced Structural Degradation on the Ultimate Strength of a High-Tensile-Steel Ship Hull

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Experimental and numerical study of residual ultimate strength of hull plate subjected to coupled damage of pitting corrosion and crack

Analysis of plated-hull structure strength against hydrostatic and hydrodynamic loads: A case study of 600 TEU container ships

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Ultimate strength assessment of ship hull structures subjected to cyclic bending moments

An experimental and numerical investigation on ultimate strength of corrugated bulkheads and plane bulkheads subjected to lateral pressure

A Two-Step Approach for Evaluating the Dynamic Ultimate Load Capacity of Ship Structures

Compressive Behaviour of Corroded Thin-Walled Circular Section Steel Stub Columns

Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Ultimate Longitudinal Strength of Composite Ship Hulls

Ultimate Strength Analysis of Ship Hull Girder Under Random Material and Geometric Properties

A Simple Empirical Formula for Predicting the Ultimate Strength of Ship Plates with Elastically Restrained Edges in Axial Compression

Uniaxial behaviour and corrosion-welding-based constitutive model of marine structural steel

Model for Wastage Allowance and Strength Properties of Pipe Piles Exposed to Marine Corrosion

A framework to analyze the probability of accidental hull girder failure considering advanced corrosion degradation for risk-based ship design