Abstract:In this article, a 1-MHz-regulated DCX (RDCX) with single transformer is proposed for high-power-density high-efficiency 48–12 V dc–dc conversion. In the proposed converter, a dc transformer (DCX) works at fixed switching frequency to realize isolation and output power conversion and an auxiliary pulsewidth modulation (PWM) converter is applied to realize voltage regulation. The auxiliary dc–dc is fed from the auxiliary winding of the transformer and its output is in series with the input dc source. The output regulation is achieved by regulating the output voltage of auxiliary dc–dc converter. Furthermore, only a small portion of power is dealt by the auxiliary PWM dc–dc converter. Thus, the total efficiency is a little bit lower than the DCX and higher than that of conventional two-stage solution. The operation principle and the design guidelines of the proposed RDCX are presented in this article. A 360 W 40–60 V/12 V dc–dc prototype is built to verify the theoretical analysis and design guidelines. In the prototype, 9.1% of load power is dealt by the auxiliary dc–dc at nominal 55 V input voltage and, at worst case, which happens rarely and the duration is short, 50% of load power is dealt by the auxiliary dc–dc stage. Finally, 97.3% peak efficiency is achieved.

Design of a 2kW 400/12V High-Output Current DC/DC Converter with Fractional-Turn Planar Transformer for Server power

Design of a 2kw 400/12V High-Output Current DC/DC Converter with Fractional-Turn Planar Transformer for Server Power

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Design of a 300 Kw Partial Power Processing Based DC-DC Converter for Electric Vehicles Extreme Fast Charging Stations

Power Decoupling Three-Port Converter with Integrated Transformer

A High Density 400 W DC/DC Power Module with Integrated Planar Transformer and Half Bridge GaN IC

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

Integrated Fractional-Turn Planar Transformer for MHz and High-Current Applications

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

Modular High Efficiency High Density MHz DCX with Different Output Voltage Adaptation

Design of High-power Density and High-frequency Transformers for Auxiliary Power Supply System in Electric Multiple Units

Optimum Design Consideration and Implementation of A Novel Synchronous Rectified Soft-Switched Phase-Shift Full-Bridge Converter for Low-Output-Voltage High-Output-Current Applications

Hybrid Resonant Converter-Based 8:1 Bus Converter With 3.5kW/in 3 and 98.6%-Efficient For 48V Data-Center Power Systems

1 MHz 48–12 V Regulated DCX with Single Transformer

1.5Kw LLC Resonant Converter with Improved Interleaved Winding Structure and Core Structure

A Two Stage DC/dc Converter with Wide Input Range for EV

A Discussion on Ultra-High Efficiency and Ultra-High Power Density DC-DC Converter Technologies

A High-Performance 3:1 Conversion Ratio DC–DC Converter: Analysis Method and Modular Adoption

A 12- or 48-V Input, 0.9-V Output Active-Clamp Forward Converter Power Block for Servers and Datacenters

Loss Model of High-Frequency Planar Transformer for High-Voltage Resonant DC/DC Converter