Abstract:Chemical looping steam methane reforming (CL-SMR) is one of the most potential methods for large-scale syngas production. As the key to CL-SMR, the development of oxygen carrier (OC) is typically limited by the factors of CH 4 conversion, H 2 selectivity and resistance to carbon deposition. However, the nonuniform distribution of metals in OC leads to unstable conversion rate and severe carbon deposition due to metal stacking effects. Therefore, the layer double hydroxides (LDHs) were introduced into OC preparation to achieve uniform metal distribution and solve the above problems. Moreover, different enhanced OCs derived from LDHs precursors were prepared to investigate the effects of divalent metal, Ni/Fe (N/I), Methane/OCs (M/O) and reaction temperature, as well as the adaptability and performance of CL-SMR. The results showed that uniformly dispersed Ni–Fe–Al OC possessed promising CH 4 conversion of 94.32%, H 2 selectivity of 72.61%, CO selectivity of 77.46%, stability of syngas production with H 2 /CO ratio of 2 and low carbon deposition of 5.28%. Further, the increase of N/I from 0.5:2.5 to 2.5:0.5 caused an increase in CH 4 conversion, H 2 selectivity and CO selectivity by 95.04%, 598.82% and 68.19%, respectively. However, the highest N/I ratio led to severe carbon deposition (17.57%) in the Ni 2.5 Fe 0.5 Al OC. Furthermore, Ni–Fe–Al OC with uniformly dispersed active metal exhibited a good stability and suitability in wide-range of M/O and temperature. In addition, H 2 selectivity gradually improved with the increase of M/O, but higher M/O of 1.2 resulted in higher carbon deposition (7.99%). Further, the increase of temperature was beneficial to the OC performance, but excessive temperature (950 °C) led to OC sintering. Moreover, this Ni 2 FeAl OC maintained good catalytic ability and lattice oxygen stability after long-term reaction.

Mid-temperature Chemical Looping Methane Reforming for Hydrogen Production Via Iron-Based Oxygen Carrier Particles

Improving the carbon resistance of iron-based oxygen carrier for hydrogen production via chemical looping steam methane reforming: A review

Uniformly dispersed NiFeAlO 4 as oxygen carrier for chemical looping steam methane reforming to produce syngas

Ce–Fe oxygen carriers for chemical-looping steam methane reforming

Co-production of syngas and H2 from chemical looping steam reforming of methane over anti-coking CeO2/La0.9Sr0.1Fe1−xNixO3 composite oxides

Optimization of nickel-iron bimetallic oxides for coproduction of hydrogen and syngas in chemical looping reforming with water splitting process

Reactivity of Iron-based Oxygen Carriers Prepared by Wet and Dry Mixing Methods for Hydrogen Production Via Biomass Derived Syngas Chemical Looping

From lab to industry: Scaling-up Fe-Ni bimetallic nano oxygen carrier for mid-temperature methane chemical looping reforming

Synergistic promotions between high purity H 2 production and CO 2 capture via sorption enhanced chemical looping reforming

Effects of supports on reduction activity and carbon deposition of iron oxide for methane chemical looping hydrogen generation

Performance evaluation of rare earth (La, Ce and Y) modified CoFe2O4 oxygen carriers in chemical looping hydrogen generation from hydrogen-rich syngas

Pressure‐Induced Enhancement in Chemical Looping Reforming of CH4 : A Thermodynamic Analysis with Fe‐Based Oxygen Carriers

A Ce–Fe Oxygen Carrier with a Core–Shell Structure for Chemical Looping Steam Methane Reforming

Performance of Ceo2-Modified Iron-Based Oxygen Carrier in the Chemical Looping Hydrogen Generation Process

Renewable hydrogen production from biogas using iron-based chemical looping technology

Thermodynamic potential of high temperature chemical looping combustion with molten iron oxide as the oxygen carrier

Use of Heavy Fraction of Bio-Oil As Fuel for Hydrogen Production in Iron-Based Chemical Looping Process

Syngas production via chemical looping reforming using methane-based feed and NiO/Al2O3 oxygen carrier

A short-cut chemical looping hydrogen generation system by using iron-based material from steel industry

Conversion of dry biogas in a chemical looping reforming unit: Performance of Fe and FeMn-based oxygen carriers

New Insight into the Development of Oxygen Carrier Materials for Chemical Looping Systems