Abstract:This special issue of the International Journal of Geomechanics contains 10 papers that cover numerical and experimental investigations on various aspects of sustainable civil infrastructures. The topics include the self-healing capability of asphalt, cracking and fracture of asphalt pavement and portland cement concrete, soilimprovement techniques (including compaction and vertical drains), and various foundation systems. There are two papers on asphalt. The self-healing of asphalt mixtures can extend the fatigue life of asphalt pavement. Huang et al. developed a method based on fuzzy evaluation and the analytic hierarchy process for evaluating the self-healing capability of asphalt mixtures. The feasibility and effectiveness of the method were validated by a case study. To understand the mechanisms of material failure is essential for the design and construction of sustainable civil infrastructures. Chen et al. proposed a multiscale numerical modeling approach to analyze the distress of asphalt pavement on steel bridge decks and applied the approach to a case study. Their results highlighted the importance of bridge structure and pavement evenness in the distribution of pavement cracks. One paper focuses on concrete fracture and damage. Xu et al. investigated the spallation failure of fiber-reinforced concrete slabs under impact loading. Their numerical simulations showed that fibers can remarkably improve the tensile strength of concrete slabs and effectively limit the initiation and propagation of cracks. Soil improvement is an important element of sustainable civil infrastructures. Three papers are related to soil-improvement techniques, including compaction and vertical drains. Nie et al. presented an integrated theoretical and case study on anomalous data detection for roller-integrated compactionmeasurement. Their results showed that the proposed bidimensional anomalous data-identification method rendered a more accurate correlation, whereas the proposed neighbor-weighted estimation method improved the precision of compaction evaluation. Two papers are related to vertical drains. Azari et al. applied an elastic–viscoplastic model to model soft soil improved with vertical drains and compared their simulation results with field measurements. Their results showed that the distribution of the overconsolidation ratios in the disturbed zone greatly influenced the viscoplastic strain rates, creep strain limits, and consolidation. Parsa-Pajouh et al. evaluated the efficiency of several proposed formulations for plane-strain modeling of vertical drain-assisted consolidation through an integrated numerical and experimental investigation. By comparing the predicted and measured pore pressures in well-controlled laboratory tests, the advantages and disadvantages of these formulations were discussed. The remaining four papers deal with foundation systems. A better understanding of soil–structure interaction can lead to optimized foundation design and construction, which increase the sustainability of many civil infrastructures. Zhou and Dai presented a new strut-and-tie model for the analysis of force distribution among piles, pile caps, and superstructure components, including struts and ties. Through two case studies, they demonstrated the effectiveness and accuracy of their model. Farouk and Farouk examined the effect of a superstructure’s rigidity on the contact stress and differential settlement for plane two-bay frames. They found that the rigidities of walls and slabs have significant effects on the resultant average contact stresses and the maximum settlements under the footings, which affect the differential settlements. They provided new charts and equations for calculating the average contact stress and maximum settlements under the inner and outer footings for plane two-bay frames. Zhang et al. developed a numerical model to investigate the working mechanism of pervious concrete piles. Their model was validated by a case study. Their results showed that pervious concrete piles can reduce foundation settlement caused by their high stiffness and permeability and, hence, are particularly suitable for reinforcing foundations with low bearing capacity and soils with poor permeability. Yang et al. conducted a numerical investigation on the load-displacement behavior of a reinforced strip footing using a double-yield model. The effects of various parameters, such as burial depth, reinforcement length, and arrangement of two reinforcement layers, were studied. Their results showed that the load-displacement behavior of strip footings simulated with the double-yield model is more realistic than that with the Mohr-Coulomb model, and the optimal burial depth and length of reinforcement obtained from their study agreed well with values reported by previous investigators.

Mathematical and Numerical Modeling in Geotechnical Engineering

Finite Element Geotechnical Analysis Incorporating Deep Learning-Based Soil Model

Parallel Hierarchical Multiscale Modelling of Hydro-Mechanical Problems for Saturated Granular Soils

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

A Coupled SPFEM/DEM Approach for Multiscale Modeling of Large‐deformation Geomechanical Problems

Bridging The Micro And Macro For Granular Media: A Computational Multi-Scale Paradigm

Reflections on Numerical Analysis of Geotechnical Engineering

3 D Numerical Analysis on the Behavior of Excavation

Problems in papers of graduate students majored in geotechnical engineering

Numerical modelling of large deformation problems in geotechnical engineering: A state-of-the-art review

An investigation of integrating the finite element method (FEM) with grey system theory for geotechnical problems.

A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering

Mathematical Modelling for Interaction Between Soft Ground and Small Curvature Shield Tunneling Considering Viscoelastic Characteristics Influences

Numerical Method to Determine Mechanical Parameters of Engineering Design in Rock Masses

Special Issue on Recent Advances in Constitutive and Numerical Methods for Sustainable Civil Infrastructures

Multiscale Insights into Classical Geomechanics Problems

Model Test And Numerical Analysis Of Geogrid-Reinforced Pile-Supported Foundation

Special Issue on "Data-Centric Geotechnics for Practice"

Effects of Thermal Cycles on Soil Behaviour: Theoretical and Experimental Studies

Numerical Modeling Analysis for Surrounding Rockmass Stability of Large Underground Cavities

Evaluation structures for machine learning models in geotechnical engineering