Abstract:Precipitation strengthening is recognized as an effective method for strengthening high-entropy alloys (HEAs) or medium-entropy alloys (MEAs), especially the recently developed CoCrFeNiTi HEA. The eta phase plays a crucial role in strengthening CoCrFeNiTix HEAs, though it remains relatively understudied. In this study, CoCrFeNiTi HEA was fabricated by laser directed energy deposition (LDED). The research investigated the effect of cooling rate on the precipitation behavior and fracture toughness of the eta phase in non-equilibrium solidified CoCrFeNiTi HEA. The findings revealed that the precipitation of the eta phase in the as-deposited LDED sample was restrained, resulting in a very low volume fraction. However, a high-volume-fraction eta phase was achieved through annealing at 900 degrees C for 6 h, followed by air cooling. This approach not only maintained the desired similar to 6.2 % volume fraction of the eta phase but also prevented its growth and coarsening (similar to 403 nm), resulting in an optimal combination of microstructure and mechanical properties. The eta phase exhibited the Blackburn type orientation relationship with the FCC phase: <11<(2)over bar>0>(eta)//<1<(1)over bar>0>FCC and {0001}(eta)//{111}(FCC). The L interface of the eta phase demonstrated a coherent relationship with the FCC phase ({0001}(eta)//{111}(FCC)), while the W interface was incoherent with the FCC phase ({11 (2) over bar0}(eta)//{1 (1) over bar0}(FCC)). The unique interface characteristics promoted a higher growth rate at the W interface compared to the L interface, leading to the preferred growth of the eta phase. The chemical compositions of both the FCC phase and eta phase were accurately predicted by experiments and simulations, elucidating the precipitation kinetics of the eta phase. When v >= v(WC), the nucleation and precipitation of the eta phase were inhibited. Conversely, when v <= v(FC), significant coarsening of the eta phase occurred. However, when v approximate to v(AC), the AC sample exhibited superior mechanical properties, with a microhardness of similar to 860 HV and excellent fracture toughness. These findings provide valuable insights and guidance for further enhancement and optimization of HEAs/MEAs strengthened by the eta phase.

Effect of Local Texture and Precipitation on the Ductility Dip Cracking of ERNiCrFe-7A Ni-based Overlay

Effect of microtextures on the intermediate temperature fracture behavior of additive-manufactured Ni-based overlay

Influence of Cr on Microstructure and Electrochemical Properties of FeNiMnCuCrx High-entropy Alloy

Effects Of Wc Crystal Characteristics On Microstructure And Mechanical Property Of Hvof-Sprayed Wc-Cocr Coatings

Influence of Grain Boundary Sliding on Ductility-Dip Cracking of Ni-based Alloy

Multi-scale Study of Ductility-Dip Cracking in Nickel-Based Alloy Dissimilar Metal Weld

Effect of Dendritic Structure and Secondary Phases on the Fatigue Behavior of ERNiCrMo-3 Weld Metal

Ductility Dip Cracking Mechanism of Ni–Cr–Fe Alloy Based on Grain Boundary Energy

Effect of Grain Boundary Behaviour on Ductility Dip Cracking Mechanism

Influence of grain size on susceptibility of ductility-dip crack on Ni-based high-temperature alloy

The Effect of Cooling Rate on the Precipitation Behavior and Fracture Toughness of the Η Phase in Lded Cocrfeniti High-Entropy Alloy

Study on the ductility-dip cracking and its formation mechanism of additive manufactured NiCrFe-7A alloy: Effect of the carbon content

Effect of Thermomechanical Processing on Microstructure and Mechanical Properties of CoCrFeNiMn High Entropy Alloy

Effect of μ precipitation and γ′ evolution on intra/intergranular strength of Ni-Co-Cr-based superalloys after 800 °C thermal exposure

Effect of closed-loop controlled melt pool width on microstructure and tensile property for Fe-Ni-Cr alloy in directed energy deposition

Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy

Effect of Intragranular Κ Carbides and Intergranular Precipitates on the Hot Deformation Mechanism and Dynamic Recrystallization Mechanism of Fe–28Mn–11Al–1.5C–5Cr Lightweight Steel

A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

Crack Susceptibility and Microstructure Analysis of Ni-based Alloy

Effects of WC on the Microstructure, Wear and Corrosion Resistance of Laser-Deposited CoCrFeNi High Entropy Alloy Coatings