Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

A High-Quality Ratio-Metric Measurement Method Based on Analog-to-Digital Converter for Precision Sensors

Amplitude Stability Detection of Sinusoidal Excitation Signal for High Precision Sensors.

Systematic Proportional Method for Improving the Measurement Accuracy of Passive Sensor Measurement System

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

Calibration of Ratiometric Digital Capacitive Angular Sensor Based on Raster Technology

A New Particle Sensor Based on True RMS Value Measurement.

IDM-Assisted Capacitive Displacement Sensor for Large-Range, High-Precision Positioning Systems

Tri-adaptive Method for Improving the Resolution of MEMS Digital Sensors

A Measuring Method for Nano Displacement Based on Fusing Data of Self-Sensing and Time-Digit-Conversion

Research of Key Technology for High Precision Capacitive Displacement Sensor

A High Resolution Synchronous Demodulation Method Based on Gated Integrator for Precision Sensors

An Absolute Measurement Technique Using Capacitive Displacement Sensor

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

Improved Accuracy of Capacitive Sensor-Based Micro-Angle Measurement with Angular-to-linear Displacement Conversion

Design and realization of a capacitive sensor measurement system

A Compact and High-Precision Capacitive Absolute Angular Displacement Sensor

High Accurate Measurement of Water Level and Temperature

An A/D Converting Technology with High Precision,Low Cost and Multiple Measuring Range

A micro resonant pressure sensor with adjustable quality factor

High-Precision Large-Displacement Measuring Method with Walking Pattern

A New Capacitive Long-Range Displacement Nanometer Sensor with Differential Sensing Structure Based on Time-Grating