Abstract:We proposed a novel kind of absolute capacitive grating displacement measuring system with both high accuracy and long range in a previous article. The measuring system includes both a MOVER and a STATOR, the contact surfaces of which are coated by a thin layer of dielectric film with a low friction coefficient and high hardness. The measuring system works in contact mode to minimize the gap changes. This paper presents a theoretical analysis of the influence of some factors, including fabrication errors, installation errors, and environment disturbance, on measurement signals. The measuring signal model was modified according to the analysis. The signal processing methods were investigated to improve the signal sensitivity and signal-to-noise ratio (SNR). The displacement calculation model shows that the design of orthogonal signals can solve the dead-zone problem. Absolute displacement was obtained by a simple method using two coarse signals and highly accurate displacement was further obtained while using two fine signals with the help of absolute information. According to the displacement calculation model and error analysis, the error in fine calculation functions mainly determines the model's accuracy and is locally affected by coarse calculation functions. It was also determined that amplitude differences, non-orthogonality, and signal offsets are not related to the accuracy of the displacement calculation model. The experiments were carried out to confirm the abovementioned theoretical analysis. The experimental results show that the displacement resolution and error in the displacement calculation model reach ±4.8 nm and ±34 nm, respectively, in the displacement range of 5 mm. The experiments and the theoretical analyses both indicate that our proposed measuring system has great potential for achieving an accuracy of tens of nanometers and a range of hundreds of millimeters.

Research of Key Technology for High Precision Capacitive Displacement Sensor

A High-Precision Laser Displacement Measurement System

Design of High Precision Capacitance Displacement Sensor

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

A Planar Capacitive Sensor for 2D Long-Range Displacement Measurement

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

A High-precision Displacement Measuring System in SPC

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

Design and realization of a capacitive sensor measurement system

Design of Capacitance Micro-Displacement Sensor and Its Application

A New Capacitive Long-Range Displacement Nanometer Sensor with Differential Sensing Structure Based on Time-Grating

Features of Capacitive Displacement Sensing That Provide High-Accuracy Measurements with Reduced Manufacturing Precision.

Error Analysis and Modeling for an Absolute Capacitive Displacement Measuring System with High Accuracy and Long Range.

A Study For Capacitance Displacement Measuring System Being Possessed of Large Range and High Accuracy

A New Capacitive Displacement Sensor With Nanometer Accuracy and Long Range

Application of a novel capacitive sensor in precise positioning systems

An Absolute Measurement Technique Using Capacitive Displacement Sensor

Inductive Displacement Sensor and Its Circuit with Deep-Submicron Accuracy

A Compact and High-Precision Capacitive Absolute Angular Displacement Sensor

Study and Application of Non-contact Type Magnetic Piezoelectric Displacement Sensor

Capacitive Linear Displacement Sensors with High Accuracy and Long Range Absolute Positioning Capability Based on a Splicing Technique