Abstract:Pulsed laser deposition (PLD) has been used to prepare a series of (Srl-xCax)l-deltaCuO2 thin film materials on [100] SrTiO3 and [100] MgO at low temperatures. X-ray diffraction (XRD), electron diffraction (ED), and ion-channeling studies have shown that all of the (Srl-xCax)l-deltaCuO2 materials (x = 0-1; delta = 0.1) grown on [100] SrTiO3 at 500-degrees-C have a layered, tetragonal structure with the c-axis oriented perpendicular to the substrate surface. In contrast, the target materials prepared by conventional high-temperature techniques have an orthorhombic structure (x = 0, delta = 0) or consist of multiple phases (x = 0, delta = 0.1; x > 0, delta = 0, 0.1). Rutherford backscattering studies have shown that the composition of the materials prepared by PLD are the same as the starting target stoichiometry, even when the targets contain multiple phases. The dependence of the product structure on growth temperature and substrate lattice constant were also determined. SrCuO2 materials grown at 500, 600, and 700-degrees-C exhibit a decreasing ratio of tetragonal/orthorhombic phase as the temperature increases. These results show that low-temperature growth traps the layered, tetragonal phase. Comparison of the SrCuO2 Structures obtained on [100] SrTiO3 and [100] MgO substrates have also shown that product-substrate lattice matching is important in stabilizing the tetragonal phase and in orienting the crystallographic growth direction. In addition, the physical properties of these new materials have been characterized by electrical and magnetic measurements. The stoichiometric (Srl-xCax)l-deltaCuO2 materials were found to be insulators. However, the nonstoichiometric (Srl-xCax)l-deltaCuO2 materials exhibited systematic increases in conductivity with decreasing x. Furthermore, the x = 0 material, Sr0.9CuO2, showed a transition to a zero resistance state with an onset of almost-equal-to 20 K. The implications of these studies to copper oxide superconductors are discussed.

Growth of the Infinite Layer Phase of SrlJMxCu02 by Llaser Ablation

Growth of the Infinite Layer Phase of Sr1−xNdxCuO2 by Laser Ablation

Exploiting Laser Based Methods for Low-Temperature Solid-State Synthesis: Growth of a Series of Metastable (Sr1-Xmx)1-.delta.cuo2 Materials

Pulsed Laser Deposition of YBa2Cu3O7 /i/lanio3trilayers (I SrTiO3, CeO2or Eu2CuO4) on (100) SrTiO3substrates

Low-Temperature Growth of the Infinite Layer Phase of Srcuo2 by Pulsed Laser Deposition

Artificial construction of the layered Ruddlesden-Popper manganite La2Sr2Mn3O10 by reflection high energy electron diffraction monitored pulsed laser deposition.

Growth, Microstructure, And Infrared-Ultraviolet Optical Conductivity Of La0.5sr0.5coo3 Nanocrystalline Films On Silicon Substrates By Pulsed Laser Deposition

Quasi‐Two‐Dimensional Ferromagnetic SrRuO3 Grown by Pulsed Laser Deposition with Layer‐by‐Layer Growth Fashion

High-temperature Interface Superconductivity in Bilayer Copper Oxide Films by Pulsed Laser Deposition

Stoichiometry, Orbital Configuration, and Metal-to-Insulator Transition in Nd0.8Sr0.2NiO3 Films.

Molecular Beam Epitaxy Growth and Surface Structure of Sr1−xNdxCuO2 Cuprate Films

Epitaxial growth of complex oxides on silicon by enhanced surface diffusion in large area pulsed laser deposition

Pulsed laser deposition growth of heteroepitaxial YBa2Cu3O7/La0.67Ca0.33MnO3 superlattices on NdGaO3 and Sr0.7La0.3Al0.65Ta0.35O3 substrates

Selective growth of epitaxial Sr2IrO4 by controlling plume dimensions in pulsed laser deposition

Growth and electrical properties of PrSr2Cu3O7−δ thin films

Pulsed Laser Deposition of LaNiO3 and YBa2Cu3O7−δ/LaNiO3 on SrTiO3 Buffered (100) MgO

Preparation of superconducting thin films of infinite-layer nickelate Nd$_{0.8}$Sr$_{0.2}$NiO$_{2}$

Growth of Single-Phase PrBa0.7Sr1.3Cu3O7 Thin Films and the Role of Lattice Strain on the Transport Properties

Doping Evolution and Polar Surface Reconstruction of the Infinite-Layer Cuprate Sr_1-xLa_xCuO_2

Preparation of Single-Phase Nd1.85 Ce0.15 CuO4 Thin Films by Pulse Laser Deposition and the Laser-Induced Thermoelectric Voltage Effect

Growth Dependencies of Epitaxial Oxide Thin Films Prepared by Pulsed Laser Deposition