Abstract:Mechanical coating followed by thermal oxidation in the atmosphere was used to prepare TiO2/SnO2 composite coatings. The coatings were characterized by X-ray diffraction (XRD), scanning electronic spectroscopy (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and so on. Results show that continuous rutile TiO2 coatings decorated with discrete SnO2 particles were formed during thermal oxidation at the temperature range of 873–1073K. Through the temperature range, a small quantity of SnO was formed. However, tiny amount of Ti2O3 was formed only when oxidation temperature was 1073K. The surface topography evolution of rutile TiO2 crystals during the thermal oxidation and relevant mechanism was also examined. Equiaxed, rod, columnar and needle TiO2 crystals with nanoscale were formed at temperatures from 873–1073K. The topography evolution indicates that the diffusion of oxygen species into the formed rutile TiO2 layer was predominant at 873K. It favored the growth of equiaxed crystals in the tangent plane rather than radial direction of Al2O3 ball substrate at the early stage of the thermal oxidation. However, the diffusion of Ti cations became prevailing compared with oxygen species at 1073K. The reaction of Ti and oxygen species occurred at the external surface of the formed TiO2 layer where rutile TiO2 needles were formed. During thermal oxidation at 973K, both the Ti cations and oxygen species were involved in the diffusion process and clusters of paired/parallel rutile TiO2 nanorods were formed. The addition of metallic Sn remarkably affected the surface topography and the grain size of rutile TiO2 crystals through regulating the diffusion of Ti cations and changing the local oxygen concentration surrounding Ti coatings. A proper additive amount refined the grains of rutile TiO2.

The Characteristics of SnO Coatings on Titanium at Different Heat-Treatment Temperature

Improvement of Bioactivity of H(2)O(2)/TaCl(5)-treated Titanium after Subsequent Heat Treatments.

Effect of SnO x film on the bonding of titanium–porcelain

Low-Temperature Preparation of Ag-TiO2 Composite Films and Their Properties

Method of preparing TiSrO3 coating on surface of titanium implant

Surface Characterization of Thermally Oxidized Titanium Alloys

Effect of Titanium Surface Oxidation on the Bonding Strength of Ti-Porcelain

Improvement of High-Temperature Oxidation Resistance of Titanium-Based Alloy by Sol–gel Method

Corrosion Resistance and Ion Dissolution of Titanium Implant under Different Temperature Thermal Oxidation

Surface Modifications to Improve Ti–porcelain Bonding

Effect of Different Heat Treatment Temperatures on Micro/Nano Grade Porous Structure Films of Treated Titanium Metal

Surface topography evolution of TiO2/SnO2 coatings during thermal oxidation of Ti/Sn composite coatings

Investigation of surface morphology, structure and electrocatalytic properties for O2 evolution of titanium based IrO2+Ta2O5 coatings

Effect of TiO2–SiO2 sol–gel coating on the cpTi–porcelain bond strength

Pores Structure Change Induced by Heat Treatment in Cold-Sprayed Ti6Al4V Coating

Formation and structure of sphene/titania composite coatings on titanium formed by a hybrid technique of microarc oxidation and heat-treatment

Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface

Evaluation of Sodium Titanate Coating on Titanium by Sol-Gel Method in Vitro

Effects of TiSi coatings with different sintering temperature on corrosion resistance of dental CoCr alloy

Effects of hydrothermal treatment on physicochemical and anticorrosion properties of titanium nitride coating on pure titanium

[The Experimental Study on Sol-Gel Technique of Coating Titanium].