Abstract:Publication date: 31 July 2023 Source: Key Engineering Materials Vol. 950 Author(s): Amalia Rohmah Fajariah, Euis Siti Nurazizah, Ferry Faizal, Lusi Safriani Recently, dye sensitized solar cell (DSSC) are considered to replace the previous generation of solar cells. DSSC uses an organic dye to absorb light and convert it to electricity. One-dimensional morphological structure of photoanode that provides a straight pathway for electron transport can improve the efficiency of DSSC. TiO2 nanofibers is one-dimensional structure of oxide semiconductor material commonly used as photoanode in DSSC. A simple method to synthesis continuous nanofiber is electrospinning method that use the influence of electrostatic forces. The nanofiber's diameter that produced by electrospinning method depends on several parameters, one of which is the applied voltage. This study reports the synthesis of TiO2 nanofibers with varying the applied voltages from 10 kV to 14 kV and their performance as photoanode in DSSC. TiO2 nanofibers were electrospun directly onto a TiO2-coated fluorine tin oxide (FTO) substrate from a mixture of titanium (IV) propoxide (TTIP), triton X-100, acetic acid, poly (vinyl) acetate (PVAc) that were dissolved in dimethyl formamide (DMF). TiO2 nanofiber photoanodes were then immersed in ruthenium (II) dye, stacked with a counter electrode, and finally the electrolyte was injected between them. Based on the SEM results, we found that the beads disappeared with increasing applied voltage. The XRD pattern of TiO2 nanofibers indicates the presence of the anatase phase. Based on the photocurrent-voltage characteristic, TiO2 nanofibers produced by applied voltage of 14 kV shows the highest efficiency of 1.11% with JSC 4.78 mA/cm2, VOC 0.74 Volt and fill factor (FF) of 31.37%.

Electron Transport in Dye-Sensitized Solar Cells Based on TiO_2 Nanowires

Electron Transport in Dye-Sensitized Solar Cells Based on Tio2 Nanowires

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

TiO2 nanotube based dye-sensitized photoanode

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Fabrication of MgO Coated TiO2 Nanowires Films and Application in Dye Sensitized Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Charge Transport and Recombination in Dye-Sensitized Solar Cells Based on Hybrid Films of TiO2 Particles/tio2 Nanotubes

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

Fabrication of MgO-Coated TiO_2 Nanowires Films and Application in Dye-Sensitized Solar Cells

Structure of Electron Collection Electrode in Dye-Sensitized Nanocrystalline TiO2

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

The photoelectrochemical properties of dye-sensitized solar cells made with TiO2 nanoribbons and nanorods

Carbon Nanotubes in Dye-Sensitized Solar Cells Photo-Anode

Enhanced Efficiency for Dye-Sensitized Solar Cells Using A Surface-Treated Photo-Anode

Titania Nanobundle Networks As Dye-Sensitized Solar Cell Photoanodes.

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Anatase TiO2 nanotubes as photoanode for dye-sensitized solar cells.

Aggregated TiO 2 -Based Nanotubes for Dye Sensitized Solar Cells

Kinetics of Electron Recombination of Dye-Sensitized Solar Cells Based on TiO2 Nanorod Arrays Sensitized with Different Dyes

Ordered TiO2 Nanotube Arrays on Transparent Conductive Oxide for Dye-Sensitized Solar Cells