Abstract:Publication date: 31 July 2023 Source: Key Engineering Materials Vol. 950 Author(s): Amalia Rohmah Fajariah, Euis Siti Nurazizah, Ferry Faizal, Lusi Safriani Recently, dye sensitized solar cell (DSSC) are considered to replace the previous generation of solar cells. DSSC uses an organic dye to absorb light and convert it to electricity. One-dimensional morphological structure of photoanode that provides a straight pathway for electron transport can improve the efficiency of DSSC. TiO2 nanofibers is one-dimensional structure of oxide semiconductor material commonly used as photoanode in DSSC. A simple method to synthesis continuous nanofiber is electrospinning method that use the influence of electrostatic forces. The nanofiber's diameter that produced by electrospinning method depends on several parameters, one of which is the applied voltage. This study reports the synthesis of TiO2 nanofibers with varying the applied voltages from 10 kV to 14 kV and their performance as photoanode in DSSC. TiO2 nanofibers were electrospun directly onto a TiO2-coated fluorine tin oxide (FTO) substrate from a mixture of titanium (IV) propoxide (TTIP), triton X-100, acetic acid, poly (vinyl) acetate (PVAc) that were dissolved in dimethyl formamide (DMF). TiO2 nanofiber photoanodes were then immersed in ruthenium (II) dye, stacked with a counter electrode, and finally the electrolyte was injected between them. Based on the SEM results, we found that the beads disappeared with increasing applied voltage. The XRD pattern of TiO2 nanofibers indicates the presence of the anatase phase. Based on the photocurrent-voltage characteristic, TiO2 nanofibers produced by applied voltage of 14 kV shows the highest efficiency of 1.11% with JSC 4.78 mA/cm2, VOC 0.74 Volt and fill factor (FF) of 31.37%.

Titania Nanobundle Networks As Dye-Sensitized Solar Cell Photoanodes.

Photo-assisted Deposition of Ag Nanoparticles on Branched TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells with Enhanced Efficiency

A novel approach to titania nanowire arrays as photoanodes of back-illuminated dye-sensitized solar cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

TiO2 nanotube based dye-sensitized photoanode

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells

TiO 2 nanoparticle seeds transformed into nanotubes for effective dye-sensitized solar cell application

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Highly Efficient Dye-Sensitized Solar Cells Based on Nitrogen-Doped Titania with Excellent Stability

Bifunctional Single-Crystalline Rutile Nanorod Decorated Heterostructural Photoanodes For Efficient Dye-Sensitized Solar Cells

Nitrogen-doped TiO2 Nanoparticles Better TiO2 Nanotube Array Photo-Anodes for Dye Sensitized Solar Cells

Dye-Sensitized Solar Cells Based on Porous Hollow Tin Oxide Nanofibers

Electron Transport in Dye-Sensitized Solar Cells Based on Tio2 Nanowires

DSSCs Using a Nanoparticle/Nanorod Composite TiO<sub>2</sub> Film As a Photoanode

Nanostructured Nitrogen Doping Tio2 Nanomaterials For Photoanodes Of Dye-Sensitized Solar Cells

TiO2 Hierarchical Nanostructures: Hydrothermal Fabrication and Application in Dye-Sensitized Solar Cells

Enhancement of photocurrent of dye-sensitized solar cell by composite liquid electrolyte including NiO nanosheets.

The photoelectrochemical properties of dye-sensitized solar cells made with TiO2 nanoribbons and nanorods

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

Modification of TiO2 Nanowire Arrays with Sn Doping As Photoanode for Highly Efficient Dye-Sensitized Solar Cells