Abstract:The wettabilities of molten metals on ceramics are poor normally. In order to improve the wettability, all existing ceramic brazing methods introduce a compound transition layer that is formed by the reaction of active metal and ceramic. The transition layer between brazing seam and ceramic however creates negative effect on the properties of brazing joints. This paper reports our study of the wetting effect of sputtered Al particles on AlN, which enables the direct brazing of AlN using deposited Al-based films as fillers, thereby eliminating the need of a transition layer. The results show that under the bombardment of energetic sputtered Al particles, Al-N chemical bonding is formed at the interface between Al film and AlN, which typically requires temperatures above 850 ℃, much higher than the melting point of Al. The bonding remained intact even after the Al film has been melted, achieving the wetting effect on AlN. As a result, the direct brazing of AlN without the need of a transition layer becomes feasible. The shear strength of Al/AlN joint using this process reaches 104 MPa. The addition of 3.8 at.% Cu to film fillers increases the shear strength to 165 MPa. The fracture is generated in metallic brazing seam in both cases. When Cu content increases to 9.1 at.%, the segregation of Cu at the interface between the brazing seam and the ceramic reduces the shear strength of the joint to 95 MPa. With Al-20 at.% Ge, the brazing temperature can be lowered to 510 ℃, although the segregation of Ge at interface results in a low shear strength of 48 MPa. Instead of the traditional use of molten metals, utilization of the metallic vapor particles to bombard AlN achieves the wetting and the direct brazing of ceramics, with no negative effect of transition layers. This breakthrough method provides a brand new perspective to the technique of ceramic brazing.

A Novel Method to Fabricate AlN-Al<inf>2</inf>O<inf>3</inf> Multiphase Ceramic Layer on WCu Alloy

Characterization of the Microstructure of an AlN-Mullite-Al 2 O 3 Ceramic Layer on WCu Composite Alloy for Microelectronic Application

Fabrication of Al 2 O 3 –mullite–aln Multiphase Ceramic Layer on W–Cu Substrates for Power Semiconductor Packaging

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

A Novel Approach of In-Situ Synthesis of WC Particulate-Reinforced Fe-30Ni Ceramic Metal Coating

Ultrafine Binderless WC-based Cemented Carbides with Varied Amounts of AlN Nano-Powder Fabricated by Spark Plasma Sintering

Microstructure, mechanical and tribological properties of multilayer grapheme reinforced WC-10Ni 3 Al prepared by microwave sintering

The Design of Nano-Porous Photocatalytic Intermediate Layer to Fabricate the Copper Layer on AlN Ceramic with High Bonding Strength Through the Interlocking Microstructure

Fabrication of Al2O3/AlN composite ceramics with enhanced performance via a heterogeneous precipitation coating process

"Wetting" and Brazing of Aln by Sputtered Al

Fabrication of Ni/WC composite with two distinct layers through centrifugal infiltration combined with a thermite reaction

Optimizing AlN hydrolysis process to fabricate coated modified powders for improving the properties of Si 3 N 4 /SiAlON ceramics prepared by Vat Photopolymerization

High-performance WC-AlCoCrFeNi 2.1 cemented carbides fabricated by resistance seam additive manufacturing

In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3–C refractories with Al4SiC4 additives

Fabrication and Properties of AlN-SiC Multiphase Ceramics <i>via</i> Low Temperature Reactive Melt Infiltration

Study on Tungsten Metallization and Interfacial Bonding of Silicon Nitride High-Temperature Co-Fired Ceramic Substrates

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Wetting and Interfacial Phenomena Between a Ni-based Superalloy and Silica-Based Ceramic Cores with ZrSiO4 Additions

Novel Chemical Method to Fabricate SiC/Al_2O_3 Ceramic Composite Coatings on Metallic Substrates

Synthesis and microstructure of layered-ternary Ti2AlC ceramic by high energy milling and hot pressing

Preparation of Al2O3/SiC/Ni/Al-Si ceramic matrix composites with multi-phase vague interface by oxidation of molten aluminum alloys

A Novel Method to Fabricate AlN-Al&lt;inf&gt;2&lt;/inf&gt;O&lt;inf&gt;3&lt;/inf&gt; Multiphase Ceramic Layer on WCu Alloy