Abstract:It is known that the plasticity models affect characterization of the crack tip fields. To predict failure one has to understand the crack tip stress field and control the crack. In the present work the element-free Galerkin methods for gradient plasticity theories have been developed and implemented into the commercial finite element code ABAQUS and used to analyze crack tip fields. Based on the modified boundary layer formulation it is confirmed that the stress singularity in the gradient plasticity theories is significantly higher than the known HRR solution and seems numerically to equal to 0.78, independently of the strain-hardening exponent. The strain singularity is much lower than the known HRR one. The crack field in gradient plasticity under small-scale yielding condition consists of three zones: The elastic K-field, the plastic HRR-field dominated by the J-integral and the hyper-singular stress field. Even under gradient plasticity there exists an HRR-zone described by the known J-integral, whereas the hyper-singular zone cannot be characterized by J. The hyper-singular zone is very small (r≪J/σ0) and contained by the HRR zone in the infinitesimal deformation framework. The finite strains under the gradient plasticity will not eliminate the stress singularity as r→0, in contrast to the known finite strain results under the Mises plasticity. Numerically no significant changes in characterization of the stress field were found in comparison with the infinitesimal deformation theory. Since the hyper-singular stress field is much smaller than the HRR zone and in the same size as the fracture process zone, one may still use the known J concept to control the crack in the gradient plasticities. In this sense the gradient plasticity will not change characterization of the crack.

The Applied Study of the Element Free Galerkin Method to Crack Propagation

An Element‐free Galerkin Method for 3D Crack Propagation Simulation under Complicated Stress Conditions

Finite Element Analysis of Crack Dynamic Response in Gradient Non- Homogeneous Finite Plate

A Singular Finite Element Modelling of Blunt Crack Problems and Numerical Analysis

Element Free Method for Plane Stress Model I Crack with Couple Stress Effect

An Improved Crack-Tip Element Treatment for Advanced FEMs

A Numerical Analysis with Scaled Boundary Finite Element Method to Simulate Mixed-mode Crack Propagation for Concrete Beams

Finite Element Modelling of Complex 3D Static and Dynamic Crack Propagation by Embedding Cohesive Elements in Abaqus

3D Finite Element Simulation of Complex Static and Dynamic Fracture in Quasi-Brittle Materials

USING ELEMENT-FREE METHOD TO TRACE CRACK PROPAGATION

Analysis for A Crack Emanating from A Corner of A Square Hole in an Infinite Plate Using the Hybrid Displacement Discontinuity Method

A numerical method for multiple cracks in an infinite elastic plate

An Adaptive Extended Finite Element Based Crack Propagation Analysis Method

Element-Free Galerkin Method for Simulation of Three-Dimensional Discontinuous Interfaces

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)

An effective boundary element method for analysis of crack problems in a plane elastic plate

Investigating propagation path of interface crack by the field-enriched finite element method

Application of EFG Method to Three-Dimensional Fracture Mechanics

Numerical Study of Quasi-Static Crack Growth Problems Based on Extended Finite Element Method

A Numerical Analysis of Stress Intensity Factors at Bifurcated Cracks

Applications of the Element-Free Galerkin Method for Singular Stress Analysis under Strain Gradient Plasticity Theories