Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

Discontinuous zone free element method with variable condensation and applications in thermal-stress analysis of functionally graded material structures with cracks

A General Finite Element Method: Extension of Variational Analysis for Nonlinear Heat Conduction with Temperature-Dependent Properties and Boundary Conditions, and Its Implementation As Local Refinement.

An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions

Dislocation-based finite element method for calculating stress intensity factors of cracks

An Augmented Finite Element Method for Modeling Arbitrary Discontinuities in Composite Materials

A Consistency-Check Based Algorithm for Element Condensation in Augmented Finite Element Methods for Fracture Analysis

Fracture analysis of functionally graded materials by the field-enriched finite element method

Numerical Simulations of Arbitrary Evolving Cracks in Geotechnical Structures Using the Nonlinear Augmented Finite Element Method (N-AFEM)

Fracture mechanics analysis of functionally graded materials by an efficient and accurate meshless method

Element-Free Galerkin Methods for Fracture of Functionally-Graded Materials

Analyzing Multiple Crack Propagation Using Extended Finite Element Method (X-FEM)

Cracking elements method with a dissipation-based arc-length approach

A new thermomechanical coupled FDEM model for geomaterials considering continuum-discontinuum transitions

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

Improvements for the solution of crack evolution using extended finite element method

Computational analysis of mixed-mode fatigue crack growth in quasi-brittle materials using extended finite element methods

A local to global (L2G) finite element method for efficient and robust analysis of arbitrary cracking in 2D solids

Development of X-FEM Methodology and Study on Mixed-Mode Crack Propagation

Numerical Simulations of Fracture Problems by Coupling the FEM and the Direct Method of Lines

A new 3D continuous-discontinuous heat conduction model and coupled thermomechanical model for simulating the thermal cracking of brittle materials

A new 2D continuous-discontinuous heat conduction model for modeling heat transfer and thermal cracking in quasi-brittle materials