Abstract:Statement of problem: Despite improvements in computer-aided design and computer-aided manufacturing (CAD-CAM) systems, grinding during either laboratory procedures or clinical adjustments is often needed to modify the shape of 3 mol(%) yttria-tetragonal zirconia polycrystal (3Y-TZP) restorations. However, the best way to achieve adjustment is unclear. Purpose: The purpose of this in vitro study was to evaluate the microstructural and crystallographic phase changes, flexural strength, and Weibull modulus of a 3Y-TZP zirconia after grinding with or without water cooling and regeneration firing. Material and methods: Ninety-six bar-shaped specimens were obtained and divided as follows: as-sintered, control; as-sintered with regeneration firing; grinding without water cooling; grinding and regeneration firing with water cooling; and grinding and regeneration firing. Grinding (0.3 mm) was performed with a 150-μm diamond rotary instrument in a high-speed handpiece. For regeneration firing, the specimens were annealed at 1000°C for 30 minutes. The crystalline phases were evaluated by using x-ray powder diffraction. A 4-point bending test was conducted (10 kN; 0.5 mm/min). The Weibull modulus was used to analyze strength reliability. The microstructure was analyzed by scanning electron microscopy. Data from the flexural strength test were evaluated using the Kruskal-Wallis and Dunn tests (α=.05). Results: Tetragonal-to-monoclinic phase transformation was identified in the ground specimens; R regeneration firing groups showed only the tetragonal phase. The median flexural strength of as-sintered specimens was 642.0; 699.3 MPa for as-sintered specimens with regeneration firing; 770.1 MPa for grinding and water-cooled specimens; 727.3 MPa for specimens produced using water-cooled grinding and regeneration firing; 859.9 MPa for those produced by grinding; and 764.6 for those produced by grinding and regeneration firing; with statistically higher values for the ground groups. The regenerative firing did not affect the flexural strength. Weibull modulus values ranged from 5.3 to 12.4. The SEM images showed semicircular cracks after grinding. Conclusions: Adjustments by grinding in 3Y-TZP frameworks should be performed with water cooling, and regeneration firing should be undertaken to obtain a more reliable material.

THE GRINDING STRESS-INDUCED MARTENSITE TRANSFORMATION IN Ce-TZP

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

In Situ Investigation of Stress-Induced Martensitic Transformation in Granular Shape Memory Ceramic Packings

Effect of grinding parameters on surface integrity and flexural strength of 3Y-TZP ceramic

Transformation-induced plasticity in zirconia during tensile loading: A combined microscopy and synchrotron X-ray refraction study

Study of 40Cr surface modification grinding force and temperature based on microstructure evolution mechanism

Grinding residual stress optimization under the micro-carburizing effect

Stress-Induced Martensitic Transformation in Na3YCl6

Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength

Martensitic Transformation and Work Hardening of Metastable Austenite Induced by Abrasion in Austenitic Fe-C-Cr-Mn-B Alloy - A Tem Study

Zirconia changes after grinding and regeneration firing

Martensitic transformation in zirconia. Part I: nanometer scale prediction and measurement of transformation induced relief

Stress-induced martensitic transformation in a β-solution treated Ti–10V–2Fe–3Al alloy during compressive deformation

Grain Size Refinement of Additive Manufactured Ce-TZP Ceramics by Coupled Two-Step Pre-Sintering and HIP

Stress-induced martensitic transformation cooperative collective effects in superelastic polycrystalline tini shape memory alloys

Accelerating Cementite Precipitation during the Non-Isothermal Process by Applying Tensile Stress in GCr15 Bearing Steel

Toughening Mechanisms of ZTA Ceramics at Cryogenic Temperature (77 K)

STUDY TO THE EFFECT OF STRESS AND STRAIN ON MARTENSITE TRANSFORMATION KINETICS AND TRANSFORMATION PLASTICITY

The Influence of Residual Stresses Induced by Grinding on the Fracture Toughness of Cemented Tungsten Carbide

Study of the effects of stress and strain on martensite transformation: Kinetics and transformation plasticity*

Transient thermal stresses developed during speed sintering of 3 mol% yttria-stabilized tetragonal zirconia polycrystals