Abstract:Purpose Due to the miniaturization of electronic devices, the increased current density through solder joints leads to the occurrence of electromigration failure, thereby reducing the reliability of electronic devices. The purpose of this study is to propose a finite element-artificial neural network method for the prediction of temperature and current density of solder joints, and thus provide reference information for the reliability evaluation of solder joints. Design/methodology/approach The temperature distribution and current density distribution of the interconnect structure of electronic devices were investigated through finite element simulations. During the experimental process, the actual temperature of the solder joints was measured and was used to optimize the finite element model. A large amount of simulation data was obtained to analyze the neural network by varying the height of solder joints, the diameter of solder pads and the magnitude of current loads. The constructed neural network was trained, tested and optimized using this data. Findings Based on the finite element simulation results, the current is more concentrated in the corners of the solder joints, generating a significant amount of Joule heating, which leads to localized temperature rise. The constructed neural network is trained, tested and optimized using the simulation results. The ANN 1, used for predicting solder joint temperature, achieves a prediction accuracy of 96.9%, while the ANN 2, used for predicting solder joint current density, achieves a prediction accuracy of 93.4%. Originality/value The proposed method can effectively improve the estimation efficiency of temperature and current density in the packaging structure. This method prevails in the field of packaging, and other factors that affect the thermal, mechanical and electrical properties of the packaging structure can be introduced into the model.

An Integrated System for Prediction and Analysis of Solder Interconnection Shapes

Predicting Three-Dimensional Solder Joint Shapes of SMT Based on Minimal Energy Principle

Automatic computer_aided system for simulating solder joint formation

Dynamic Substructure Method for Prediction of Solder Joint Reliability of IC Package under Drop Test

A new prediction methodology for electromigration-induced solder degradation in a WL-CSP system

Overview on Solder Joint Shape Prediction Technology in Electronic Packaging

Interface of Solder Joint Shape Prediction of RC Chip and Reliability Analysis in SMT

Shape Prediction of BGA Solder Joint and Its Reliability Optimization Design

Shape Prediction and Reliability Design of Ball Grid Array Solder Joints

An Improved Substructure Method For Prediction Of Solder Joint Reliability In Thermal Cycle

Prediction of Solder Bump Formation in Solder Jet Packaging Process

Prediction of Solder Joint Geometry for Optical Fiber Attachment Assembly in Direct-Coupling Applications

Numerical investigation of solder joint shape for micro-spring package during vacuum vapor phase soldering

Simulation, Prediction and Verification of the Thermal and Electrical Properties of Sintered Copper Joints with Random Pore Structure for Power Electronics Packaging

Temperature prediction for system in package assembly during the reflow soldering process

Finite Element Modeling Optimized by Solder Joint Morphology Simulation for Electrical-Magnetic-Thermal-Force Multi-Physical Field Coupling of PCB Assemblies

Effect of Die Size and Die Tilt on Solder Reliability under Thermal Cycling

Improved modeling for solder joint geometry and self-alignment in flip chip bonding

Modeling of Three-Dimensional Geometry of Solder Joint in Fiber Attachment Soldering

PADS: Predictive Anomaly Detection for SMT Solder Joints Using Novel Features from SPI and Pre-AOI Data

Temperature and Current Density Prediction in Solder Joints Using Artificial Neural Network Method