Abstract:The foamed alumina ceramics with excellent sound absorption performance especially at low frequency were fabricated by gelcasting-foaming process which gelled at room temperature. This process was simpler and more environmental-friendly than conventional gelcasting process because only a very small amount of organics were used and then green bodies could be sintered directly without binder removal process. The effects of foaming agent on porosity, pore size, compressive strength and sound absorption characteristics of the porous ceramics with different air-gap depths were discussed. The results showed that with the increasing of foaming agent content from 0.10 to 0.25 wt%, the porous ceramics had higher porosity, larger pore size, smaller compressive strength and better sound absorption characteristics. But the foaming agent's effect got less significant than before when it's amount was more than 0.25 wt%. The sound absorption peak of foamed ceramics shifted towards higher frequency as increasing foaming agent content, but it shifted towards lower frequency as increasing the air-gap depth. And within the data range of this study, increasing porosity could improve the sound absorption characteristic of the ceramics with an air gap. The ceramic with foaming agent content of 0.25 wt% and air-gap depth of 80mm had the best sound absorption whose maximum sound absorption coefficient and noise reduction coefficient is 0.99 at 400 Hz and 0.79 respectively, and its mean sound absorption coefficient at 50-1000 Hz is similar to 0.6. (C) 2020 The Ceramic Society of Japan. All rights reserved.

Sound Absorption Properties of Open-Cells Aluminum Foams Prepared by Infiltration Casting Methods

Preparation of open-celled aluminum foams by countergravity infiltration casting

Preparation of Open-Celled Aluminum Foams by Counter-Gravity Infiltration Casting

Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Manufacturing of open-cell aluminum foams via infiltration casting in super-gravity fields and mechanical properties

Sound Absorption of Cellular Metals with Semiopen Cells

Influence Factors of Sound Absorption Properties of Closed-Cell Aluminum Foam

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Sound absorption performance and mechanism of aluminum foams with double main pores‐porous cell walls (DMP‐PCW) structure

Improving sound absorption of aluminum foams by drilling holes

High sound absorption characteristics of foamed alumina ceramics fabricated by gelcasting-foaming process

Preparation and Compression Behavior of High Porosity, Microporous Open-Cell Al Foam Using Supergravity Infiltration Method

Acoustic Absorption Characteristics of Foamed Aluminum

Sound absorption properties of porous aluminum

Preparation of Big Size Open-Cell Aluminum Foam Board Using Infiltration Casting

Study on Sound Absorption Performance of Aluminum Foam Combination

Acoustic Performance of Aluminum Foams with Semiopen Cells

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Preparation and Characterization of Foam Aluminum with Different Aperture