Abstract:Aluminum foams with a functionally graded density have exhibited better impact resistance and a better energy absorbing performance than aluminum foams with a uniform density. Nevertheless, the anisotropic compression behavior caused by the graded density has scarcely been studied. In this paper, a density graded aluminum foam (FG) was prepared by a controlled foaming process. The effect of density anisotropy on the mechanical behavior of FGs was investigated under quasi-static compression and a low-velocity impact. Digital image correlation (DIC) and numerical simulation techniques were used to identify deformation mechanisms at both macro and cell levels. Results show that transverse compression on FGs lead to a higher collapse strength but also to a lower energy absorption, due to the significant decrease in densification strain and plateau stress. The deformation behavior of FGs under longitudinal compression was dominated by the progressive extension of the deformation bands. For FGs under transverse compression, the failure mode of specimens was characterized by multiple randomly distributed deformation bands. Moreover, the transverse compression caused more deformation on cells, through tearing and lateral stretching, because of the high lateral strain level in the specimens. It was concluded that the transverse compression of FGs lead to a lower plateau stress and a lower cell usage, thus resulting in a poorer energy absorption efficient; this constitutes a key factor which should be taken into consideration in structural design.

Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Quasi-static Deformation Mechanism and Compressive Properties of Aluminum Foams Fabricated by Friction Stir Processing

Three-dimensional Voronoi-based simulation study of stepwise density-graded aluminum foams: Buffering and energy absorption performance analysis

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Sound absorption performance and mechanism of aluminum foams with double main pores‐porous cell walls (DMP‐PCW) structure

Acoustic Absorption Characteristics of Foamed Aluminum

Anisotropic Compressive Behavior of Functionally Density Graded Aluminum Foam Prepared by Controlled Melt Foaming Process

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Impact response of additively manufactured density-graded open-cell foams

Measurements of Thermal Radiation in Ultralight Metal Foams with Open Cells

Optimized design and experimental validation of sound absorption coefficient performance in aluminium metal foam by spark plasma sintering

Sound Absorption in Replicated Aluminum Foam

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

Fabrication, Processing, Properties, and Applications of Closed-Cell Aluminum Foams: A Review

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Fabrication of Uniform and Rounded Closed-Cell Aluminum Foams Using Novel Foamable Precursor Particles (FPPs)

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam