Abstract:As a new type of structurally functional material, aluminum foam is widely used in civil engineering due to its excellent noise and energy reduction, thermal insulation, and fire protection properties. However, systematic research into the mechanical properties, application technology, and specification standards of aluminum foam materials in civil engineering application scenarios is lacking. In this work, a special experimental study on the mechanical properties and deformation mechanism of closed-cell aluminum foam materials in compression after fire was carried out. The mechanism of deformation and failure of closed-cell aluminum foam was revealed, and the variation in the mechanical properties of closed-cell aluminum foam with porosity, and heating temperature were investigated. On the basis of the experimental results, the correlation function between material parameters and material porosity in the Liu–Subhash constitutive model was established through multiparameter regression analysis. Then, an intrinsic structure model of aluminum foam that can consider porosity was proposed. The research results show that (1) the compression deformation process of closed-cell aluminum foam specimens exhibits significant stage characteristics: a quasi-elastic stage of quasi-elastic deformation of the matrix and cell structure → a plateau stage of cell structure destabilization and damage → a densification stage of cell collapse and stacking. (2) As the porosity decreases, the aluminum foam material becomes more resistant to compressive deformation and shows better compressive mechanical properties overall. With an increase in the heat treatment temperature, the elastic gradient, compressive proof strength, and plateau stress of the aluminum foam material show a small decrease in the overall trend. (3) The predicted values of the intrinsic structure model of closed-cell aluminum foam are in good agreement with the experimental results, indicating that the model can efficiently characterize the stress–strain process of the material and is referable.

Sound absorption performance and mechanism of aluminum foams with double main pores‐porous cell walls (DMP‐PCW) structure

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Influence Factors of Sound Absorption Properties of Closed-Cell Aluminum Foam

Acoustic Absorption Characteristics of Foamed Aluminum

Improving sound absorption of aluminum foams by drilling holes

Sound Absorption of Cellular Metals with Semiopen Cells

Study on Sound Absorption Performance of Aluminum Foam Combination

Efficient and broadband sound absorption properties of slotted aluminum foam

Sound absorption properties of porous aluminum

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Study on Damping Behavior of Foamed Aluminum with Macroscopic Pores

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients

Enhancement Effect and Energy Absorption of Double-Layer Metallic Lattice Structure Filled with Aluminum Foam

Sound Absorption Properties of Open-Cells Aluminum Foams Prepared by Infiltration Casting Methods

Hierarchical pore structure based on cellulose nanofiber/melamine composite foam with enhanced sound absorption performance

High sound absorption characteristics of foamed alumina ceramics fabricated by gelcasting-foaming process

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

The Compressive Properties and Deformation Mechanism of Closed-Cell Aluminum Foam with High Porosity after High-Temperature Treatment

A Double Porosity Material for Low Frequency Sound Absorption