Abstract:Recent high-tech applications of ultralightweight close-celled aluminum foams require a tighter control of their pore morphologies. To this end, the progress made during the past ten years in this field is systematically summarized. Inherent relationships amongst pore size, porosity and pore shape are explored, key steps of pore structure control and their cross-relations are determined, and a general framework of processing steps and techniques affecting pore structure control during the foaming process of molten aluminum is established. Built upon this framework, the relationships of three key control parameters (pore size, porosity, pore shape) with industrial applications, fabrication technologies and processing methods are systematically addressed. It is demonstrated that the evolution of cellular structure is influenced by many processing factors such as viscosity, foaming time and solidification mode. This makes the foaming and solidification processes extremely complicated, leading to difficulties in pore structure control. To obtain pure aluminum foams having high porosity, it needs not only to precisely control the porosity making use of the relationship between porosity and foaming time, but also to solidify in time during the plateau stage on the porosity-time curve to control the pore size and uniformity of pore distribution. To obtain aluminum alloy foams, in addition to the steps mentioned above, multidirectional solidification is also needed in order to overcome the shrinkage caused by the additional force field during cooling. For high strength aluminum alloy foams having spherical pores and relatively low porosities, a suitable amount of vesicant (about 1.0%) and proper stirring time (about 100 seconds) are required in order to drop the plateau stage of porosity-time curve to low porosity regime. Faced with new high-tech needs, the novel method of two steps foaming has more advantages and potentials over other technologies to fabricate unconventionally shaped components and large-sized multifunctional panels.

Preparation and Characterization of Foam Aluminum with Different Aperture

Preparation and Compression Behavior of High Porosity, Microporous Open-Cell Al Foam Using Supergravity Infiltration Method

Factors affecting the microstructure of a fine ceramic foam

Pore Structure and Compressive Properties of Open-Cell Aluminum Foams Prepared by Infiltration Casting Based on NaCl Space-Holder

Preparation of Big Size Open-Cell Aluminum Foam Board Using Infiltration Casting

Preparation of Aluminum Foam by Gas Injection Foaming

Manufacturing of open-cell aluminum foams via infiltration casting in super-gravity fields and mechanical properties

Aluminum Foam Sandwich: Pore Evolution Mechanism Investigation and Engineering Preparing Optimization

Preparation of Shaped Aluminum Foam Parts by Investment Casting

Preparation of complex shaped aluminum foam by a novel casting-foaming method

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Control of Pore Morphology in Close-Celled Aluminum Foams

Investigation of Thermal Conditions of Porous Aluminum Formation

Foaming Behavior of Microsized Aluminum Foam Using Hot Rolling Precursor

Characterization of as-cast microstructure of aluminum foams by melt foaming method

POROSITY PREDICATION WITH MICROSTRUCTURAL METHOD FOR OPEN-CELL ALUMINUM FOAM

Preparation and Compressive Performance of an A356 Matrix Syntactic Foam

Effect of Shape of Pore Forming Agent on Structure and Properties of Aluminum Foams

Sound absorption performance and mechanism of aluminum foams with double main pores‐porous cell walls (DMP‐PCW) structure

Fabrication of Aluminum Foams with Small Pore Size by Melt Foaming Method