Control of Pore Morphology in Close-Celled Aluminum Foams

Qiancheng Zhang,Tianjian Lu,Siyuan He,Deping He

DOI: https://doi.org/10.3321/j.issn:0253-987X.2007.03.001

2007-01-01

Abstract:Recent high-tech applications of ultralightweight close-celled aluminum foams require a tighter control of their pore morphologies. To this end, the progress made during the past ten years in this field is systematically summarized. Inherent relationships amongst pore size, porosity and pore shape are explored, key steps of pore structure control and their cross-relations are determined, and a general framework of processing steps and techniques affecting pore structure control during the foaming process of molten aluminum is established. Built upon this framework, the relationships of three key control parameters (pore size, porosity, pore shape) with industrial applications, fabrication technologies and processing methods are systematically addressed. It is demonstrated that the evolution of cellular structure is influenced by many processing factors such as viscosity, foaming time and solidification mode. This makes the foaming and solidification processes extremely complicated, leading to difficulties in pore structure control. To obtain pure aluminum foams having high porosity, it needs not only to precisely control the porosity making use of the relationship between porosity and foaming time, but also to solidify in time during the plateau stage on the porosity-time curve to control the pore size and uniformity of pore distribution. To obtain aluminum alloy foams, in addition to the steps mentioned above, multidirectional solidification is also needed in order to overcome the shrinkage caused by the additional force field during cooling. For high strength aluminum alloy foams having spherical pores and relatively low porosities, a suitable amount of vesicant (about 1.0%) and proper stirring time (about 100 seconds) are required in order to drop the plateau stage of porosity-time curve to low porosity regime. Faced with new high-tech needs, the novel method of two steps foaming has more advantages and potentials over other technologies to fabricate unconventionally shaped components and large-sized multifunctional panels.