Abstract:Femtosecond laser surface processing is a technology that can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or superhydrophilicity/superhydrophobicity. In this study, two unique classes of surface structures, below surface growth (BSG) and above surface growth (ASG) mounds, were formed by femtosecond laser surface processing on amorphous and polycrystalline Ni60Nb40 with two different grain sizes. Cross sectional imaging of these mounds revealed thermal evidence of the unique formation processes for each class of surface structure. BSG mounds formed on all three substrates using the same laser parameters had similar surface morphology. The microstructures in the mounds were unaltered compared with the substrate before laser processing, suggesting their formation was dominated by preferential valley ablation. ASG mounds had similar morphology when formed on the polycrystalline Ni60Nb40 substrates with 100 nm and 2 [H9262]m grain size. However, the ASG mounds had significantly wider diameter and higher peak-to-valley heights when the substrate was amorphous Ni60Nb40. Hydrodynamic melting was primarily responsible for ASG mound formation. On amorphous Ni60Nb40 substrates, the ASG mounds are most likely larger due to lower thermal diffusivity. There was clear difference in growth mechanism of femtosecond laser processed BSG and ASG mounds, and grain size does not appear to be a factor.

SURFACE NITRIDATION OF MOLYBDENUM BY PULSE LASER

Surface nitridation of molybdenum by laser-promoted reaction

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Preparation of molybdenum nitrides by laser-promoted nitridation reaction

Surface nitridation of transition metals by pulsed laser irradiation in gaseous nitrogen

Surface nitridation of titanium using pulse laser gas alloying method and its microstructure analysis with XRD and SEM

Preparation and Surface Chemistry Study of Supported Cobalt Molybdenum Metal Nitrides

Hole Doping In Epitaxial Mose2 Monolayer By Nitrogen Plasma Treatment

Carbonization of a Molybdenum Substrate Surface and Nanoparticles by a One-Step Method of Femtosecond Laser Ablation in a Hexane Solution

Laser powder bed fusion additive manufacturing of molybdenum using a nitrogen build atmosphere

Deposition and Evaluation of MoNx Films Deposited by Magnetron Sputtering

Investigation on Surface Nitridation of Titanium by Pulsed Laser

Laser deposition of refractory MO- NI alloys

Niobium and rhenium doping in MoSe2 monolayer during molecular beam epitaxy: Shallow dopants and defect proliferation

Numerical Analysis of Melting and Evaporation Behavior of Molybdenum Layer Irradiated with a Laser Beam.

Comparative Study on the Surface Remelting of Mo-Si-B Alloys with Laser and Electron Beam

Investigations on MoS2 plasma by IR pulsed laser irradiation in high vacuum

Microstructure and High-Temperature Oxidation Resistance of Molybdenum Disilicide Coating

Surface Reconstruction on Metal Nitride during Photo‐oxidation

Micro/nanostructures formation by femtosecond laser surface processing on amorphous and polycrystalline Ni60Nb40

Laser Induced Dielectric Breakdown as a Novel Method for the Synthesis of Molybdenum Boride