Abstract:Molybdenum nitrides and oxynitrides have been increasingly realized as (electro)catalysts for a variety of reactions. In this context, the cubic "γ-Mo2N", also known to contain oxygen in the bulk, is of particular interest. The γ phase is typically derived from ammonolysis of MoO3, and a high temperature is needed to fully react the stable MoO2 intermediate that often forms along the reaction pathway. In this study, ammonolysis of atypical bronze (HxMoO3) and peroxo (H2MoO5) precursors was undertaken to avoid the formation of this undesired intermediate with the aim of synthesizing "γ-Mo2N" at reduced temperatures and thus with a high surface area. It was found, using in situ powder diffraction, that, when the phase I bronze (x ≈ 0.3) served as the precursor, MoO2 formed as an intermediate and was retained in the reaction product until 700 °C. In contrast, ammonolysis of the phase III bronze (x ≈ 1.7) and of H2MoO5 circumvented the MoO2 intermediate. From these latter two precursors, "γ-Mo2N" was formed at the lowest maximum reaction temperatures reported in the literature, namely, 480 °C in the case of HxMoO3-III and 380 °C for H2MoO5. The resulting products displayed extremely high surface areas of 206 and 152 m2/g, respectively, presumably as a consequence of the low synthesis temperatures. While the HxMoO3-III precursor showed evidence of a topotactic transformation pathway, with morphological similarity between precursor and product phases, H2MoO5 transformed via amorphization. Electrochemical characterization showed moderate activity for the hydrogen evolution reaction (HER), which increased after exposure to reducing potentials and loosely scaled with the catalyst-specific surface area. This work points toward new low-temperature synthesis pathways for accessing molybdenum (oxy)nitrides with high surface areas.

Surface nitridation of molybdenum by laser-promoted reaction

Preparation of molybdenum nitrides by laser-promoted nitridation reaction

SURFACE NITRIDATION OF MOLYBDENUM BY PULSE LASER

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Surface nitridation of transition metals by pulsed laser irradiation in gaseous nitrogen

Preparation and Surface Chemistry Study of Supported Cobalt Molybdenum Metal Nitrides

Surface nitridation of titanium using pulse laser gas alloying method and its microstructure analysis with XRD and SEM

Carbonization of a Molybdenum Substrate Surface and Nanoparticles by a One-Step Method of Femtosecond Laser Ablation in a Hexane Solution

Laser Induced Nano and Micro Structures of Molybdenum Surface Applied in Multistage Depressed Collector for Secondary Electron Suppression

Laser powder bed fusion additive manufacturing of molybdenum using a nitrogen build atmosphere

Numerical Analysis of Melting and Evaporation Behavior of Molybdenum Layer Irradiated with a Laser Beam.

Surface Reconstruction on Metal Nitride during Photo‐oxidation

Deposition and Evaluation of MoNx Films Deposited by Magnetron Sputtering

Investigation on Surface Nitridation of Titanium by Pulsed Laser

On the laser gas (N<sub>2</sub>) alloying in the welding of molybdenum alloy

Microstructural Characterization and Anti‐Oxidation Properties of Molybdenum Disilicide Coating on Niobium by Spent MoSi 2 ‐Based Materials

Laser deposition of refractory MO- NI alloys

Microstructure and High-Temperature Oxidation Resistance of Molybdenum Disilicide Coating

Investigations on MoS2 plasma by IR pulsed laser irradiation in high vacuum

Molybdenum Oxide Precursors that Promote the Low-Temperature Formation of High-Surface-Area Cubic Molybdenum (Oxy)nitride

Comparison of open-atmosphere nitriding on various metal surfaces triggered by a focused pulsed laser irradiation