Abstract:Indium antimonide (InSb) is a III-V compound semiconductor with a narrow bandgap and a high electron mobility, and is used in various optoelectronic devices. Electrodeposition represents a low-cost, scalable method for fabricating InSb films. In the literature, aqueous electrolytes and ionic liquids have commonly been applied. In this work, the electrodeposition of InSb films and nanowires from a dimethyl sulfoxide (DMSO)-based electrolyte was demonstrated. This electrolyte enabled electrodeposition in a broader potential range and at higher temperatures as compared to aqueous electrolytes. The electrolyte has a lower viscosity than ionic liquids, therefore exhibiting better mass transport properties for electrodeposition. It was shown that antimony(III) chloride, a precursor that is commonly used for InSb electrodeposition, leads to the formation of the metastable "explosive" antimony allotrope. Instead, self-prepared antimony(III) nitrate and indium(III) methanesulfonate were used, and were proven to be suitable precursors. Electrolytes with a 5:1 indium-to-antimony precursor molar ratio enabled electrodeposition of InSb films at 21 °C and 120 °C on platinum and n-type InSb(400), as well as electrodeposition of InSb nanowires in anodized aluminum oxide templates. The morphology, elemental composition and crystallinity of as-deposited InSb was analyzed using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD), respectively. It was demonstrated that the film quality did not improve at 120 °C. Tauc plots from FT-IR transmission measurements were used for the determination of the bandgap of the deposits. The bandgap of the InSb films on platinum was 0.159 eV at 21 °C and 0.168 eV at 120 °C, whereas the bandgap of the InSb film deposited at 120 °C on InSb(400) was 0.186 eV.

Ionothermal Synthesis and Characterization of In_2S_3 Nanomaterials with Different Frameworks and Morphologies

ChemInform Abstract: Organothermal Synthesis and Characterization of Nanocrystalline Β‐indium Sulfide.

Low-Temperature Synthesis of Nains2 Nanoplate Layered Structure by One-Step Solvothermal Decomposition of In(S2cnet2)(3) Complex

Synthesis, characterization and optical property of flower-like indium tin sulfide nanostructures.

Preparation And Characterization Of Bismuth Sulfide Single Crystal Nanorods In Ionic Liquids

Preparation of In2S3 and Cu-Doped In2S3 2D Ultrathin Nanoflakes with Tunable Absorption and Intense Photocurrent Response

Morphogenesis and Crystallization of Bi2s3 Nanostructures by an Ionic Liquid-Assisted Templating Route: Synthesis, Formation Mechanism, and Properties

Hydrothermal Preparation and Characterization of Nanocrystalline Powder of β-Indium Sulfide

Hydrothermal Synthesis of Cu2S Nanocrystalline Thin Film on Indium Tin Oxide Substrate: Morphology, Optical and Electrical Properties

Simple synthesis of flower-like ln2S3 structures and their use as templates to prepare CuS particles

Self-Assembled Porous 3d Flowerlike Beta-In2s3 Structures: Synthesis, Characterization, And Optical Properties

Uniform In2S3 octahedron-built microspheres: Bioinspired synthesis and optical properties

Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Synthesis and Characterization of Ternary CuInS2 Nanorods Via a Hydrothermal Route

Indium Hydroxide and Indium Oxide Nanospheres, Nanoflowers, Microcubes, and Nanorods: Synthesis and Optical Properties

The In2 S3 nanosphere prepared with ultrasonic assistant and its photocatalytic performance

Electrodeposition of indium antimonide (InSb) from dimethyl sulfoxide-based electrolytes

Optical and Electrical Properties of Wurtzite Copper Indium Sulfide Nanoflakes

General Synthesis of I-III-VI2 Ternary Semiconductor Nanocrystals.

Anisotropic Growth of Indium Antimonide Nanostructures