Abstract:The contradiction between large field of view, big exit pupil and large eye relief in immersive virtual reality (VR) head-mounted displays limits the probability that such bulky device would be accepted by the most consumers. Typical of the wide field of view optical systems, Oculus CV1 adopts the Fresnel lens as the eyepiece to display the magnified virtual image. However, complexity in fabricating the Fresnel lens makes the commercial VR products with it cost-inefficient, especially when both surfaces employ the Fresnel surface. A wide field of view coaxial catadioptric system is proposed to serve as the magnified optics in this paper, which consists of a wire grid polarizer, two quarter-wave plates and a powered lens, making the optics thinner and fabrication easier. Note that coated on the surface of one quarter-wave plate is a partially reflecting coating. The powered lens takes the role of imaging, while the wire grid polarizer and the quarter-wave plates work together to adjust the polarization orientation so as to suppress direct transmission. The resulting monocular optical system yields the field of view as large as 110 degrees, with virtual image exhibited 5 meters away from the observer. Exit pupil diameter and eye relief of the designed system are 9 mm and 15 mm, respectively. Considerable distortion will appear inevitably when field of view approaches 100 degrees, which could be tackled via electronic correction. With evaluation in the CODEV, weight of the whole monocular optics is about 35 grams and the distance from the element near the observer to the image source is as thin as 30 mm, showing that the suggested design is superior to the ones in the form of singlet, doublet and the singlet using aspheric surface or Fresnel, in terms of the weight, compactness and fabricating cost. With this monocular optical system, an HMD binocular optical system can be achieved in the form of partially overlapping field of view. The present design offers a solution to acquiring the light-weight and small-volume VR optics and making cost of the commercial VR products acceptable to the public at the same time.

Design of a See-through Off-Axis Head-Mounted-Display Optical System with an Ellipsoidal Surface

Design of a See-Through Head-Mounted Display with a Freeform Surface

Design and Fabrication of a Compact Off-Axis See-Through Head-Mounted Display Using a Freeform Surface.

Design and fabrication of an off-axis see-through head-mounted display with an x-y polynomial surface

Design of a Low Distortion Head-Mounted Display with Freeform Reflective Mirror Based on Two Ellipsoids Structure

Design of Off-Axis Head-Mounted Display Optical System Based on Two Reflective Optical Free-Form Surfaces

Design and Evaluation of Optical See-Through Head-Mounted Display With Wide FOV Based on Dihedral Corner Reflector Array

Design of a wide-angle, lightweight head-mounted display using free-form optics tiling.

Design and Fabrication of a Wide-Angle Off-Axis Three-Mirror Head-Mounted Display System

Design Of A Compact Wide Field Of View Hmd Optical System Using Freeform Surfaces - Art. No. 662416

Design Of An Optical See-Through Head-Mounted Display With A Low F-Number And Large Field Of View Using A Freeform Prism

Design, tolerance, and fabrication of an optical see-through head-mounted display with free-form surface elements.

Design of a thin see-though optical viewer with a freeform surface

Design of a Compact Wide Field of View HMD Optical System using Freeform Surfaces

Design of head-mounted display optical system with DOE

Development of a Compact Optical See-Through Head-Mounted Display with Dual Focal Planes and Spatial Multiplexing Using Freeform Prisms

Large Field-Of-View and High Resolution Free-Form Head-Mounted Display

Design of an Immersive Head-Mounted Display with Coaxial Catadioptric Optics

Design, Stray Light Analysis, and Fabrication of a Compact Head-Mounted Display Using Freeform Prisms

Design Of Two-Dimensional Waveguide Head-Up Display

Fabrication Of An Off-Axis Head-Mounted Display System With X-Y Polynomial Surface