Abstract:Holographic optical element(HOE) lens is an imaging element fabricated through recording wavefront by interference. Because of its advantages of small form factor and wavelength, angle selectivity and arbitrary wavefront formation, it has a good application prospect in augmented reality display. To make the system more compact, the HOE is set as an off-axis optical element. At the same time, due to its diffraction principle, its wavelength response is more sensitive than traditional refractive and reflective optical elements. Thus the fabrication and design of a full-color HOE lens is a challenge to optimize the free-space head-up displays system. To systematically analyze the HOE imaging system, the conjugate relation between the object and image is derived by scalar diffraction theory. Then the Gaussian conjugate imaging equation is obtained and the off-axis aberration of distortion and astigmatism in the HOE imaging systems are analyzed. In addition, A head-up display with FOV of 18°and eyebox of 10mm is simulated and its imaging process is visualized through the geometric optics method of k-vector diagram and ray-tracing. A full-color HOE lens with high diffraction efficiency was fabricated by interference. Its average peak diffraction efficiency is 56%, reaching the highest level in the world. A prototype of augmented reality system is established by combining laser pico-projectior with HOE lens. The experimental results of distortion and astigmatism effects of the system are obtained, which are consistent with the simulation results. The MTF parameters of the system are measured, and its definition basically meets the resolution requirements of the human eye. The aberration of the system is analyzed and the optimization method is proposed. To optimize the monochromatic image quality, an extra cylindrical lens is added to ensure the same optical power of meridian and sagittal plane to eliminate astigmatism. Besides, a freeform wavefront is designed by geometric construction method and form a freeform HOE to deal with the distortion problem. The local recording freeform wavefront can be calculated by the imaging equation. When full-color HOE is applied in the display system, the images of three channels may separate in the space because of their different reconstruction wavelengths and angles. We propose a pre-compensation method of in the recording process to solve this problem. If these above problems can be solved, due to its good image uniformity, sufficient field angle and eyebox area, the head-up display based on HOE lens with extra optical power will have a better application in augmented reality technology.

Design of confocal off-axis two-mirror system for head-up display

Design of a dual-focal-plane head-up display system using double freeform mirrors

Design of a head-up display based on freeform reflective systems for automotive applications

Design of a See-through Off-Axis Head-Mounted-Display Optical System with an Ellipsoidal Surface

Design of Dual-Focal-Plane AR-HUD Optical System Based on a Single Picture Generation Unit and Two Freeform Mirrors

Design and fabrication of an off-axis see-through head-mounted display with an x-y polynomial surface

Holographic waveguide head-up display with 2-D pupil expansion and longitudinal image magnification

3D holographic head mounted display using holographic optical elements with astigmatism aberration compensation

Zoomable head-up display with the integration of holographic and geometrical imaging

Design of a See-Through Head-Mounted Display with a Freeform Surface

Accommodation-capable holographic waveguide head-up display with extended field of view

Design of a Low Distortion Head-Mounted Display with Freeform Reflective Mirror Based on Two Ellipsoids Structure

Design of a zoom head-up display optical system based on a nodal aberration theory

Design and Evaluation of Optical See-Through Head-Mounted Display With Wide FOV Based on Dihedral Corner Reflector Array

An Augmented Reality Head-Up Display System with a Wide-View Eyebox

A varifocal augmented reality head‐up display using Alvarez freeform lenses

34.3: A Dual Depth Head Up Display System for Vehicle

Lightweight Spatial-Multiplexed Dual Focal-Plane Head-Mounted Display Using Two Freeform Prisms

Augmented reality display system based on full-color lens holographic optical elements

Initial configuration design of off-axis reflective optical system based on vector aberration theory

Design, analysis and optimization of a waveguide-type near-eye display using a pin-mirror array and a concaved reflector