Abstract:In this paper, the stability of the nanorod-structured La0.8Sr0.2Co0.2Fe0.8O3−δ (LSCF)–Gd0.2Ce0.8O1.9 (GDC) composites prepared with combined methods of electrospinning and infiltration has been investigated. For comparison, conventional nanoparticle-structured LSCF–GDC composite cathodes were also developed. Electrochemical impedance spectra of these LSCF–GDC composite cathodes at open circuit potentials were measured using an electrolyte-supported LSCF–GDC/GDC/LSCF–GDC symmetric cell configuration for stability evaluation. The results show that the conventional LSCF–GDC composite cathode has poor stability, with its polarization resistance increasing from 0.80 to 1.37Ωcm2 after being polarized under a current density of 100mAcm−2 for 120h at 650°C. This degradation is attributed to the agglomeration of cathode materials and to poor contact between the cathode and the electrolyte. In contrast, the nanorod-structured LSCF–GDC composite cathode exhibits an excellent performance stability, since its polarization resistance decreases from 0.097 to 0.077Ωcm2 after polarization for 144h under a current density as high as 300mAcm−2. In addition, a nearly constant polarization resistance is maintained during a 20-cycle thermo-cyclic test. The outstanding stability of the nanorod-structured LSCF–GDC composite cathode is ascribed to the stability of its microstructure with continuous electronic and ionic conduction pathways and high porosity, this microstructure is realized through the suppression of LSCF agglomeration by the compact GDC layers. These results demonstrate that the nanorod-structured LSCF–GDC composite is a reliable material for use as intermediate temperature solid oxide fuel cell cathode with a high performance.

A Gd₀.₂Ce₀.₈O₁.₉ Impregnated Pr₀.₄Sr₀.₆Co₀.₂Fe₀.₇Nb₀.₁O₃₋δ Nanofiber-Structured Composite Anode in Solid Oxide Fuel Cells

Nanofiber-structured Pr0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ-Gd0.2Ce0.8O1.9 Symmetrical Composite Electrode for Solid Oxide Fuel Cells

Electro-Spinning Pr(0.4)Asr(0.6)Co(0.2)Fe(0.7)Nb(0.1)O(3-Delta) Nanofibers Infiltrated With Gd0.2ce0.8o1.9 Nanoparticles As Cathode For Intermediate Temperature Solid Oxide Fuel Cell

A Gd<sub>0.2</sub>Ce<sub>0.8</sub>O<sub>1.9</sub> impregnated Pr<sub>0.4</sub>Sr<sub>0.6</sub>Co<sub>0.2</sub>Fe<sub>0.7</sub>Nb<sub>0.1</sub>O<sub>3−δ</sub> nanofiber-structured composite anode in solid oxide fuel cells

Nanofiber-based La 0.4 Sr 0.6 TiO 3 -Gd 0.2 Ce 0.8 O 1.9 -Ni composite anode for solid oxide fuel cells

Sulfur‐Tolerant Hierarchically Porous Ceramic Anode‐Supported Solid‐Oxide Fuel Cells with Self‐Precipitated Nanocatalyst

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr$lt;inf$gt;0.6$lt;/inf$gt;Sr$lt;inf$gt;0.4$lt;/inf$gt;Co$lt;inf$gt;0.2$lt;/inf$gt;Fe$lt;inf$gt;0.8$lt;/inf$gt;O$lt;inf$gt;3-delta$lt;/inf$gt; Electrodes

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

One Dimensional La0.8Sr0.2Co0.2Fe0.8O3−δ/Ce0.8Gd0.2O1.9 Nanocomposite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr0.6Sr0.4Co0.2Fe0.8O3-δElectrodes

Liquid Plasma Sprayed Nano-Network La0.4sr0.6co0.2fe0.8o3/Ce0.8gd0.2o2 Composite As A High-Performance Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

High-performance Ni In-Situ Exsolved Ba(Ce0.9Y0.1)0.8Ni0.2O3-δ/Gd0.1Ce0.9O1.95 Composite Anode for SOFC with Long-Term Stability in Methane Fuel

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Performance of Gd0.2Ce0.8O1.9 Infiltrated La0.2Sr0.8TiO3 Nanofiber Scaffolds As Anodes for Solid Oxide Fuel Cells: Redox Stability and Effects of Electrolytes

Nanofiber-based LaxSr1−xTiO3-GdyCe1−yO2−δ composite anode for solid oxide fuel cells

Stability of nanorod-structured La 0.8 Sr 0.2 Co 0.2 Fe 0.8 O 3−δ –Gd 0.2 Ce 0.8 O 1.9 composite cathodes for intermediate temperature solid oxide fuel cells

Electrospinning La0.8Sr0.2Co0.2Fe0.8O3−δ Tubes Impregnated with Ce0.8Gd0.2O1.9 Nanoparticles for an Intermediate Temperature Solid Oxide Fuel Cell Cathode

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

Preparation and Performance Study of One-Dimensional Nanofiber-Based Sm0.5Sr0.5CoO3-δ-Gd0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

Enhanced Performance of Solid Oxide Fuel Cells with Ni/CeO2 Modified La0.75Sr0.25Cr0.5Mn0.5O3− Anodes