Abstract:In this paper, the stability of the nanorod-structured La0.8Sr0.2Co0.2Fe0.8O3−δ (LSCF)–Gd0.2Ce0.8O1.9 (GDC) composites prepared with combined methods of electrospinning and infiltration has been investigated. For comparison, conventional nanoparticle-structured LSCF–GDC composite cathodes were also developed. Electrochemical impedance spectra of these LSCF–GDC composite cathodes at open circuit potentials were measured using an electrolyte-supported LSCF–GDC/GDC/LSCF–GDC symmetric cell configuration for stability evaluation. The results show that the conventional LSCF–GDC composite cathode has poor stability, with its polarization resistance increasing from 0.80 to 1.37Ωcm2 after being polarized under a current density of 100mAcm−2 for 120h at 650°C. This degradation is attributed to the agglomeration of cathode materials and to poor contact between the cathode and the electrolyte. In contrast, the nanorod-structured LSCF–GDC composite cathode exhibits an excellent performance stability, since its polarization resistance decreases from 0.097 to 0.077Ωcm2 after polarization for 144h under a current density as high as 300mAcm−2. In addition, a nearly constant polarization resistance is maintained during a 20-cycle thermo-cyclic test. The outstanding stability of the nanorod-structured LSCF–GDC composite cathode is ascribed to the stability of its microstructure with continuous electronic and ionic conduction pathways and high porosity, this microstructure is realized through the suppression of LSCF agglomeration by the compact GDC layers. These results demonstrate that the nanorod-structured LSCF–GDC composite is a reliable material for use as intermediate temperature solid oxide fuel cell cathode with a high performance.

Nanofiber-structured Pr0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ-Gd0.2Ce0.8O1.9 Symmetrical Composite Electrode for Solid Oxide Fuel Cells

Electro-Spinning Pr(0.4)Asr(0.6)Co(0.2)Fe(0.7)Nb(0.1)O(3-Delta) Nanofibers Infiltrated With Gd0.2ce0.8o1.9 Nanoparticles As Cathode For Intermediate Temperature Solid Oxide Fuel Cell

A Gd₀.₂Ce₀.₈O₁.₉ Impregnated Pr₀.₄Sr₀.₆Co₀.₂Fe₀.₇Nb₀.₁O₃₋δ Nanofiber-Structured Composite Anode in Solid Oxide Fuel Cells

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr0.6Sr0.4Co0.2Fe0.8O3-δElectrodes

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr$lt;inf$gt;0.6$lt;/inf$gt;Sr$lt;inf$gt;0.4$lt;/inf$gt;Co$lt;inf$gt;0.2$lt;/inf$gt;Fe$lt;inf$gt;0.8$lt;/inf$gt;O$lt;inf$gt;3-delta$lt;/inf$gt; Electrodes

Preparation and Performance Study of One-Dimensional Nanofiber-Based Sm0.5Sr0.5CoO3-δ-Gd0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

One Dimensional La0.8Sr0.2Co0.2Fe0.8O3−δ/Ce0.8Gd0.2O1.9 Nanocomposite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

A Gd<sub>0.2</sub>Ce<sub>0.8</sub>O<sub>1.9</sub> impregnated Pr<sub>0.4</sub>Sr<sub>0.6</sub>Co<sub>0.2</sub>Fe<sub>0.7</sub>Nb<sub>0.1</sub>O<sub>3−δ</sub> nanofiber-structured composite anode in solid oxide fuel cells

Exploring MnCr2O4–Gd0.1Ce0.9O2-δ As a Composite Electrode Material for Solid Oxide Fuel Cell

Electrospinning La0.8Sr0.2Co0.2Fe0.8O3−δ Tubes Impregnated with Ce0.8Gd0.2O1.9 Nanoparticles for an Intermediate Temperature Solid Oxide Fuel Cell Cathode

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

Enhanced Electrochemical Performance and Operating Stability of La0.8Sr0.2Co0.2Fe0.8O3-δ Fiber Cathode Via Gd0.2Ce0.8O1.9-δ Coating for Intermediate Temperature Solid Oxide Fuel Cells

Highly Active and Robust La0.8sr0.2co0.2fe0.8o3-Δ Fiber Based Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

Liquid Plasma Sprayed Nano-Network La0.4sr0.6co0.2fe0.8o3/Ce0.8gd0.2o2 Composite As A High-Performance Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Stability of nanorod-structured La 0.8 Sr 0.2 Co 0.2 Fe 0.8 O 3−δ –Gd 0.2 Ce 0.8 O 1.9 composite cathodes for intermediate temperature solid oxide fuel cells

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

Highly Active and Robust A-site Deficient La0.77Sr0.2Co0.2Fe0.8O3-δ Fiber Base Electrode for Intermediate Temperature Solid Oxide Cells

Characterization of Symmetrical SrFe0.75Mo0.25O3−δ Electrodes in Direct Carbon Solid Oxide Fuel Cells