Abstract:Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (PSCFNx, x=0.1,0.2) catalysts are prepared and utilized as electrodes in symmetric solid oxide fuel cells (SOFCs) for hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). Although, the PSCFNx cathode retains its perovskite phase during operation in SOFCs, the anode is totally decomposed and decorated with exsolved metallic Ni-Fe alloy (denoted as re-PSCFN) in a reducing atmosphere. Electrochemical impedance spectroscopy (EIS) combined with distribution of relaxation times (DRT) analysis reveals that the rate-limiting step for the HOR at the anode is the hydrogen adsorption-dissociation process. While the charge transfer process is found to dominate the ORR at the cathode. As the doping of Ni is increased, the cathode polarization resistance for ORR decreases from 0.19 Ω·cm2 for PSCFN0.1 to 0.09 Ω·cm2 for PSCFN0.2 at 800 °C in air. A similar trend is observed for the anode polarization resistance for HOR, which exhibits a reduction from 2.46 Ω·cm2 of re-PSCFN0.1 to 1.28 Ω·cm2 of re-PSCFN0.2 at 800 °C in H2. When fueled with hydrogen, the single cell based on the PSCFN0.2/La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM)(240μm)/re-PSCFN0.2 configuration delivers a maximum power density of 623 mW·cm-2 and slight performance degradation when operated for 220 h at 800 °C. Ni doping results in the charge redistribution of B-site ions. Increasing the doping level of Ni results in additional electron transfer channels and oxygen vacancies that adsorb more oxygen species, which facilitates the ORR performance. Furthermore, an increase in the number of Ni-Fe nanoparticles and creation of abundant interfaces in the anode promotes HOR. This work suggests that PSCFN0.2 has the potential to be an excellent electrode material for a symmetric SOFC.

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr$lt;inf$gt;0.6$lt;/inf$gt;Sr$lt;inf$gt;0.4$lt;/inf$gt;Co$lt;inf$gt;0.2$lt;/inf$gt;Fe$lt;inf$gt;0.8$lt;/inf$gt;O$lt;inf$gt;3-delta$lt;/inf$gt; Electrodes

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr0.6Sr0.4Co0.2Fe0.8O3-δElectrodes

Nanofiber-structured Pr0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ-Gd0.2Ce0.8O1.9 Symmetrical Composite Electrode for Solid Oxide Fuel Cells

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

Enhancement of Electrochemical Performance for Proton Conductive Solid Oxide Fuel Cell by 30%GDC-LSCF Cathode

Palladium and ceria infiltrated La0.8Sr0.2Co0.5Fe0.5O3-δ cathodes of solid oxide fuel cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Electrochemical Performance of Symmetric Solid Oxide Cells Employing a Sc-doped SrFeO3-δ-based Electrode

Pd-La0.6Sr0.4Co0.2Fe0.8O3-delta composite as active and stable oxygen electrode for reversible solid oxide cells

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

Electro-Spinning Pr(0.4)Asr(0.6)Co(0.2)Fe(0.7)Nb(0.1)O(3-Delta) Nanofibers Infiltrated With Gd0.2ce0.8o1.9 Nanoparticles As Cathode For Intermediate Temperature Solid Oxide Fuel Cell

Solid Oxide Fuel Cells Supported on Cathodes with Large Straight Open Pores and Catalyst-Decorated Surfaces

A Gd₀.₂Ce₀.₈O₁.₉ Impregnated Pr₀.₄Sr₀.₆Co₀.₂Fe₀.₇Nb₀.₁O₃₋δ Nanofiber-Structured Composite Anode in Solid Oxide Fuel Cells

Cerium and ruthenium co-doped La<sub>0.7</sub>Sr<sub>0.3</sub>FeO3- as a high-efficiency electrode for symmetrical solid oxide fuel cell

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Optimisation and Evaluation of La0.6Sr0.4CoO3 – Δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

High performance and stability of PrBa0.5Sr0.5Fe2O5+δ symmetrical electrode for intermediate temperature solid oxide fuel cells

Highly Active and Robust A-site Deficient La0.77Sr0.2Co0.2Fe0.8O3-δ Fiber Base Electrode for Intermediate Temperature Solid Oxide Cells

Sc-substituted La0.6Sr0.4FeO3−δ Mixed Conducting Oxides As Promising Electrodes for Symmetrical Solid Oxide Fuel Cells