Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Effect of Different Organic Modifiers on the Tensile Properties of PVC／EVA／Montmorillonite Composites

Effect Of Different Organic Modifiers On The Tensile Properties Of Pvc/Eva/Montmorillonite Composites

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Influence of OMMT on Halogen-free Flame Retardant PC/ABS Blends

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Morphology and Fracture Behavior of Toughening-Modified Poly(Vinyl Chloride)/Organophilic Montmorillonite Composites

Effect of epoxy resin on morphology and physical properties of PVC/organophilic montmorillonite nanocomposites

Effect of Different Clay Treatment on Morphology and Mechanical Properties of PVC-clay Nanocomposites

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Influence of the clay modification and compatibilizer on the structure and mechanical properties of ethylene-propylene-diene rubber/montmorillonite composites

Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites

PVC/montmorillonite nanocomposites based on a thermally stable, rigid-rod aromatic amine modifier

Structures And Mechanical Properties Of Pvc/Na+- Montmorillonite Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Influence of Clay Modification on the Structure and Mechanical Properties of Epdm/Montmorillonite Nanocomposites

Studies on the Structure and Properties of PVC/organic Montmorillonite Composites Toughened by Rigid Inorganic Particles

Effect of alkyl quaternary ammonium on processing discoloration of melt-intercalated PVC-montmorillonite composites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Processing Thermal Stability and Degradation Kinetics of Poly(vinyl Chloride)/montmorillonite Composites

Effect of Organic Montmorillonite on Stability of PE Composite