Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Structures And Mechanical Properties Of Pvc/Na+- Montmorillonite Nanocomposites

Effect of Different Clay Treatment on Morphology and Mechanical Properties of PVC-clay Nanocomposites

Study on thermal stability of PP/MMT nanocomposites

Abs/蒙脱土纳米复合材料的制备、结构及性能

PVC/montmorillonite nanocomposites based on a thermally stable, rigid-rod aromatic amine modifier

Structure And Properties Of Nanocomposites Prepared By Directly Melt Blending Ethylene-Co-Vinylacetate And Natural Montmorillonite

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Morphology and mechanical properties of poly(vinyl chloride)/nano-hydrotalcite composites

Effect of epoxy resin on morphology and physical properties of PVC/organophilic montmorillonite nanocomposites

Structure and Properties of Poly(vinyl Chloride)/halloysite Nanotubes Nanocomposites

Synthesis and Properties of Poly(Methyl Methacrylate)/Montmorillonite (pmma/mmt) Nanocomposites

Structure and Properties of Comb-Branched Water-Borne Polyurethane/montmorillonite Nanocomposites

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

Structure and Property of Pu/Mmt Nanocomposites by In-Situ Polymerization

Study on thermoplastic polyurethane/montmorillonite nanocomposites

Structure and properties of NBR/PVC/OMMT nanocomposites

Studies on the Structure and Properties of PVC/organic Montmorillonite Composites Toughened by Rigid Inorganic Particles

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Preparation and Characterization of Poly (trimethylene Terephthalate)/montmorillonite Nanocomposites

Effect of compound organification of montmorillonite on the structure and properties of polypropylene/montmorillonite nanocomposites